广东化工
廣東化工
엄동화공
GUANGDONG CHEMICAL INDUSTRY
2013年
15期
142-144
,共3页
含油废水%三元微电解%正交实验%Fenton氧化%回用
含油廢水%三元微電解%正交實驗%Fenton氧化%迴用
함유폐수%삼원미전해%정교실험%Fenton양화%회용
利用微电解-Fenton氧化法深度处理某石化企业含油废水.正交实验结果表明,进水含油量为20~30 mg/L时,在Fe/Cu/C质量比为2∶1∶1条件下,三元微电解最佳工艺参数:初始pH为5,液固比为2∶1,反应时间为75 min;单因素实验确定Fenton氧化法最佳工艺参数:H2O2投加量为1.0 mL/L,废水pH为5,反应时间为40 min.在以上条件下,总除油率可达96%~98%,出水含油量可达工业回用水标准,实现废水循环利用目的.
利用微電解-Fenton氧化法深度處理某石化企業含油廢水.正交實驗結果錶明,進水含油量為20~30 mg/L時,在Fe/Cu/C質量比為2∶1∶1條件下,三元微電解最佳工藝參數:初始pH為5,液固比為2∶1,反應時間為75 min;單因素實驗確定Fenton氧化法最佳工藝參數:H2O2投加量為1.0 mL/L,廢水pH為5,反應時間為40 min.在以上條件下,總除油率可達96%~98%,齣水含油量可達工業迴用水標準,實現廢水循環利用目的.
이용미전해-Fenton양화법심도처리모석화기업함유폐수.정교실험결과표명,진수함유량위20~30 mg/L시,재Fe/Cu/C질량비위2∶1∶1조건하,삼원미전해최가공예삼수:초시pH위5,액고비위2∶1,반응시간위75 min;단인소실험학정Fenton양화법최가공예삼수:H2O2투가량위1.0 mL/L,폐수pH위5,반응시간위40 min.재이상조건하,총제유솔가체96%~98%,출수함유량가체공업회용수표준,실현폐수순배이용목적.