CAJ | 학술논문

模数转换器（ADC ）是连接模拟电路与数字电路的纽带，其动态有效位直接影响导航接收机的性能。目前常用的 ADC动态有效位测量方法基于单频信号，其测量准确性依赖于信号源的载噪比，对于处理扩频信号的导航接收机来说，其测量结果并不一定能真实反映接收机的实际情况。本文基于导航接收机解扩端载噪比，提出了一种可以直接测量导航接收机ADC动态有效位的方法，并通过实验对测量结果进行了验证。
모수전환기（ADC ）시련접모의전로여수자전로적뉴대，기동태유효위직접영향도항접수궤적성능。목전상용적 ADC동태유효위측량방법기우단빈신호，기측량준학성의뢰우신호원적재조비，대우처리확빈신호적도항접수궤래설，기측량결과병불일정능진실반영접수궤적실제정황。본문기우도항접수궤해확단재조비，제출료일충가이직접측량도항접수궤ADC동태유효위적방법，병통과실험대측량결과진행료험증。
ADC (Analog to Digital Converter) is the ties connected to the analog circuits and digital circuits ,its dynamic Effective Numbers of Bits (ENOB) affect the navigation re-ceiver performance directly .Currently the most common method for ADC dynamic ENOB measurement is based on single-frequency signal ,the measurement accuracy depends on the carrier to noise ratio (CNR) of the signal source ,the navigation receiver processing spread spectrum signal ,the measurement results do not reflect the actual receiver situation .Based on the CNR of the navigation receiver despreading side ,a method is proposed to measure the ADC dynamic (ENOB) of the navigation receiver ,and the measurement results were verified through experiments .