CAJ | 학술논문

热介质锅炉在安装施工完成之后，通常要对锅炉及其所带附属机械设备作单机起动检测。其目的是考验设备设计、制造和安装调试的质量，验证设备连续工作的可靠性，对设备性能作一次检测，并将检测的数据与设备制造出厂记录的数据进行比较，对设备工程的质量作出评价。在实际工作中往往会碰到意想不到的异常现象，使锅炉起动失败而跳闸。为了便于事后分析，在锅炉起动之前，我们就应做好事前准备工作，对电器、二次回路接线、及相关机械装置等进行检查，并对检查的结果加以分析。本文着重介绍锅炉调试时，作为检验员应该作好哪些检验工作，从而为下一步锅炉的顺利投产打好基础。
열개질과로재안장시공완성지후，통상요대과로급기소대부속궤계설비작단궤기동검측。기목적시고험설비설계、제조화안장조시적질량，험증설비련속공작적가고성，대설비성능작일차검측，병장검측적수거여설비제조출엄기록적수거진행비교，대설비공정적질량작출평개。재실제공작중왕왕회팽도의상불도적이상현상，사과로기동실패이도갑。위료편우사후분석，재과로기동지전，아문취응주호사전준비공작，대전기、이차회로접선、급상관궤계장치등진행검사，병대검사적결과가이분석。본문착중개소과로조시시，작위검험원응해작호나사검험공작，종이위하일보과로적순리투산타호기출。
After fixing the hot medium boiler, we should run it and it’s af iliated machines to test the quality of the equipments on design, fabricating, fixing, and commis ioning, and test the reliability of the continuity work. Testing the capability of equipment and compare with the data in factory, and evaluate the quality of equipment. In practice, some abnormal phenomena that lead boiler can’t be started happen sometimes. Before starting boiler, we should do prepare work careful y including check wiring of the 2nd loop of electrical equipment and mutuality machines. This article expatiated the key points and basic methods of test work as a inspector during the hot medium boiler commis ioning.