功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2014年
1期
1143-1146
,共4页
陈明丽%仇红%李敏%徐志军%初瑞清%马帅%姬万滨%李国荣
陳明麗%仇紅%李敏%徐誌軍%初瑞清%馬帥%姬萬濱%李國榮
진명려%구홍%리민%서지군%초서청%마수%희만빈%리국영
直接反应烧结法%BaTiO3基压电陶瓷%相结构%微观结构%电性能
直接反應燒結法%BaTiO3基壓電陶瓷%相結構%微觀結構%電性能
직접반응소결법%BaTiO3기압전도자%상결구%미관결구%전성능
direct reaction sintering method%BaTiO3 -based piezoceramics%phase structure%microstructure%electri-cal properties
采用直接反应烧结法制备了(Ba1-x Cax )(Ti0.85 Zr0.15)O 3无铅压电陶瓷,分析了不同的 Ca 含量时陶瓷的晶相结构、微观结构、密度及电性能.结果表明,采用直接反应烧结法制备的(Ba1-x Cax )(Ti0.85 Zr0.15)O3无铅压电陶瓷具有纯的钙钛矿相结构;微观结构致密,晶粒大小比较均匀,陶瓷样品出现较大的直径收缩率(25%左右);随着 Ca 含量的增加陶瓷的居里温度略微降低,室温介电常数出现较大增加,压电常数变大,其中 x =0.15时压电性能最好,d 33为208 pC/N.
採用直接反應燒結法製備瞭(Ba1-x Cax )(Ti0.85 Zr0.15)O 3無鉛壓電陶瓷,分析瞭不同的 Ca 含量時陶瓷的晶相結構、微觀結構、密度及電性能.結果錶明,採用直接反應燒結法製備的(Ba1-x Cax )(Ti0.85 Zr0.15)O3無鉛壓電陶瓷具有純的鈣鈦礦相結構;微觀結構緻密,晶粒大小比較均勻,陶瓷樣品齣現較大的直徑收縮率(25%左右);隨著 Ca 含量的增加陶瓷的居裏溫度略微降低,室溫介電常數齣現較大增加,壓電常數變大,其中 x =0.15時壓電性能最好,d 33為208 pC/N.
채용직접반응소결법제비료(Ba1-x Cax )(Ti0.85 Zr0.15)O 3무연압전도자,분석료불동적 Ca 함량시도자적정상결구、미관결구、밀도급전성능.결과표명,채용직접반응소결법제비적(Ba1-x Cax )(Ti0.85 Zr0.15)O3무연압전도자구유순적개태광상결구;미관결구치밀,정립대소비교균균,도자양품출현교대적직경수축솔(25%좌우);수착 Ca 함량적증가도자적거리온도략미강저,실온개전상수출현교대증가,압전상수변대,기중 x =0.15시압전성능최호,d 33위208 pC/N.
(Ba1 -x Cax )(Ti0.85 Zr0.1 5 )O 3 (x =0-0.15)lead-free piezoceramics were prepared by direct reaction sinte-ring method.The phase structure,microstructure,density and electrical properties of the ceramics with differ-ent Ca contents were analyzed.The ceramics prepared by direct reaction sintering method possessed pure per-ovskite phase structure.The ceramics showed compact microstructure and large diameter shrinkage.The Curie temperatures of the samples slightly decreased for all the samples.The piezoelectric constant d 3 3 increased grad-ually with increasing the Ca content.When x =0.15 the sample possessed largest piezoelectric constant of 208 pC/N.