广东化工
廣東化工
엄동화공
GUANGDONG CHEMICAL INDUSTRY
2013年
19期
94-95
,共2页
印刷电路板%清洗废水%模块组合%回用
印刷電路闆%清洗廢水%模塊組閤%迴用
인쇄전로판%청세폐수%모괴조합%회용
采用“预处理系统+UF系统+RO系统”工艺对某印刷电路板公司的一般清洗废水处理回用.整个回用系统采用模块化组合,自动控制.系统稳定运行后验收,COD去除率达到90%以上,Cu2+的去除率大于99%,导电率由2000雌/啪降至150 μs/cm,水的回用率也达到了业主要求.
採用“預處理繫統+UF繫統+RO繫統”工藝對某印刷電路闆公司的一般清洗廢水處理迴用.整箇迴用繫統採用模塊化組閤,自動控製.繫統穩定運行後驗收,COD去除率達到90%以上,Cu2+的去除率大于99%,導電率由2000雌/啪降至150 μs/cm,水的迴用率也達到瞭業主要求.
채용“예처리계통+UF계통+RO계통”공예대모인쇄전로판공사적일반청세폐수처리회용.정개회용계통채용모괴화조합,자동공제.계통은정운행후험수,COD거제솔체도90%이상,Cu2+적거제솔대우99%,도전솔유2000자/박강지150 μs/cm,수적회용솔야체도료업주요구.