CAJ | 학술논문

考虑到潜艇耐压壳上不可避免地要设置一些正交单圆孔，并采用围壁进行补强，利用ABAQUS通用有限元软件对该结构形式的系列模型进行求解，并利用等效原理分离出各应力成分，最终得出开孔率、围壁厚度、围壁高度以及围壁在壳体外的比例对各应力成分的影响规律。
고필도잠정내압각상불가피면지요설치일사정교단원공，병채용위벽진행보강，이용ABAQUS통용유한원연건대해결구형식적계렬모형진행구해，병이용등효원리분리출각응력성분，최종득출개공솔、위벽후도、위벽고도이급위벽재각체외적비례대각응력성분적영향규률。
The single radial opening is common on the pressure hull of submarine , and is stiffened by coaming usually .The ABAQUS software was utilized to calculate the stresses of cylindrical shell cut with single radial opening .The stress components were separated according to the equivalent principles to study the influence of coaming parameters upon stresses distribution , such as opening rate , thickness and height of coaming .