中国钨业
中國鎢業
중국오업
CHINA TUNGSTEN INDUSTRY
2014年
2期
1-4
,共4页
全尾砂胶结充填%立式砂仓%空区充填%工艺流程%残矿回采
全尾砂膠結充填%立式砂倉%空區充填%工藝流程%殘礦迴採
전미사효결충전%입식사창%공구충전%공예류정%잔광회채
whole tailings backfill%vertical sand positions%empty area filled%process%remnant ore mining
为防止或限制某白钨矿山采空区大面积塌方和地表沉陷,矿山对采空区进行了全尾砂胶结充填。该矿山根据尾砂粒级组成和胶结充填材料强度的试验结果,设计了全尾砂胶结充填系统的工艺流程,采用立式砂仓对低浓度全尾砂浆进行沉淀脱水形成高浓度全尾砂浆,将高浓度全尾砂浆、散装水泥及适量调浓水混合连续搅拌均匀后制备成充填料浆,经充填钻孔及井下充填管路自流或者加压输送至采场空区进行充填,并解决了一些胶结充填过程中的具体问题。
為防止或限製某白鎢礦山採空區大麵積塌方和地錶沉陷,礦山對採空區進行瞭全尾砂膠結充填。該礦山根據尾砂粒級組成和膠結充填材料彊度的試驗結果,設計瞭全尾砂膠結充填繫統的工藝流程,採用立式砂倉對低濃度全尾砂漿進行沉澱脫水形成高濃度全尾砂漿,將高濃度全尾砂漿、散裝水泥及適量調濃水混閤連續攪拌均勻後製備成充填料漿,經充填鑽孔及井下充填管路自流或者加壓輸送至採場空區進行充填,併解決瞭一些膠結充填過程中的具體問題。
위방지혹한제모백오광산채공구대면적탑방화지표침함,광산대채공구진행료전미사효결충전。해광산근거미사립급조성화효결충전재료강도적시험결과,설계료전미사효결충전계통적공예류정,채용입식사창대저농도전미사장진행침정탈수형성고농도전미사장,장고농도전미사장、산장수니급괄량조농수혼합련속교반균균후제비성충전료장,경충전찬공급정하충전관로자류혹자가압수송지채장공구진행충전,병해결료일사효결충전과정중적구체문제。
In order to prevent or limit the landslides and goaf subsidence of a scheelite mine, this paper backfills the mine gob with whole tailings. Technology process of whole tailings backfill is developed according to the tailings grain size composition and testing results of Cemented filling material strength. Whole tailings mortar of high concentration is formed with low concentrated precipitated dehydration. Filling slurry is prepared by continuous mixing high concentrated whole tailings backfill, bulk cement and darker water. Some concrete problems are solved by fill drilling, underground piping artesian filling or pressurized air delivered to the stope fill areas.