CAJ | 학술논문

2垄4行夹持归集装置安装在2垄4行全喂入花生联合收获机上。该装置主要是将挖掘出来的两路花生进行夹持、抖土，然后将两路花生归集到一处，方便后续作业。该装置的研制大幅度提高了花生收获的工作效率。经试验分析，夹持喂入率在98％以上，去土率大于70％，掉果率不大于0．1％，作业效率在0．2hm2/h 以上，夹断率几乎为0，花生秧果在归集过程中没有发生堵塞现象，各项指标都能够达到设计要求。
2롱4행협지귀집장치안장재2롱4행전위입화생연합수획궤상。해장치주요시장알굴출래적량로화생진행협지、두토，연후장량로화생귀집도일처，방편후속작업。해장치적연제대폭도제고료화생수획적공작효솔。경시험분석，협지위입솔재98％이상，거토솔대우70％，도과솔불대우0．1％，작업효솔재0．2hm2/h 이상，협단솔궤호위0，화생앙과재귀집과정중몰유발생도새현상，각항지표도능구체도설계요구。
2 ridges and 4 lines clamping and collection device installed in the 2 ridges and 4 lines peanut combine har-vester , the device primarily clamped 2 ridge peanuts and shake off the soil , and then 2 ridge peanuts were collected to one place to facilitate the following job .The device greatly improved the work efficiency of peanut harvest , the test analy-sis showed that the rate of clamping was 98%above , the rate of shaking off the soil was more than 70%, falling fruit rate was less than 0.1%, the working efficiency was 0.2 hm2/h, cutting rate was almost zero , and there was no jam phe-nomenon during the collection process .Each index can meet the design requirements .