粉末冶金材料科学与工程
粉末冶金材料科學與工程
분말야금재료과학여공정
POWDER METALLURGY MATERIALS SCIENCE AND ENGINEERING
2013年
5期
687-692
,共6页
TiAl合金%细晶%粉末冶金%非晶晶化
TiAl閤金%細晶%粉末冶金%非晶晶化
TiAl합금%세정%분말야금%비정정화
TiAl based alloys%amorphous%crystallization
采用非晶晶化法制备由?-TiAl相组成、晶粒尺寸为0.15?m的粉末冶金Ti-50%Al(原子分数)合金。首先对Ti、Al元素混合粉末进行高能球磨,制备Ti-50%Al非晶粉末;再通过1000℃/1 h热压,得到致密度为96%的Ti-50%Al合金。采用X射线衍射研究制备过程中的结构演变;利用透射电镜对非晶粉末和致密TiAl合金的微观形貌进行观察。结果表明,Ti-50%Al混合粉末经过100 h高能球磨后转化为无序的非晶相,其结构演变过程为:Ti+ Al?Ti(Al)过饱和固溶体(h.c.p)?非晶相。Ti-50%Al 非晶粉末在随后的热压过程中发生晶化,晶化温度为660~750℃,晶化过程为:非晶相?无序?相(h.c.p)??-TiAl相(+?2-Ti3Al相),非晶晶化后化学成分基本保持不变。Ti-50%Al非晶的晶化过程与具有高过冷度的过冷液体的形核过程类似,?相晶体以非晶结构中存在的h.c.p.晶体团簇或以二十面体簇转变的h.c.p.晶体团簇为核心而形核和长大。
採用非晶晶化法製備由?-TiAl相組成、晶粒呎吋為0.15?m的粉末冶金Ti-50%Al(原子分數)閤金。首先對Ti、Al元素混閤粉末進行高能毬磨,製備Ti-50%Al非晶粉末;再通過1000℃/1 h熱壓,得到緻密度為96%的Ti-50%Al閤金。採用X射線衍射研究製備過程中的結構縯變;利用透射電鏡對非晶粉末和緻密TiAl閤金的微觀形貌進行觀察。結果錶明,Ti-50%Al混閤粉末經過100 h高能毬磨後轉化為無序的非晶相,其結構縯變過程為:Ti+ Al?Ti(Al)過飽和固溶體(h.c.p)?非晶相。Ti-50%Al 非晶粉末在隨後的熱壓過程中髮生晶化,晶化溫度為660~750℃,晶化過程為:非晶相?無序?相(h.c.p)??-TiAl相(+?2-Ti3Al相),非晶晶化後化學成分基本保持不變。Ti-50%Al非晶的晶化過程與具有高過冷度的過冷液體的形覈過程類似,?相晶體以非晶結構中存在的h.c.p.晶體糰簇或以二十麵體簇轉變的h.c.p.晶體糰簇為覈心而形覈和長大。
채용비정정화법제비유?-TiAl상조성、정립척촌위0.15?m적분말야금Ti-50%Al(원자분수)합금。수선대Ti、Al원소혼합분말진행고능구마,제비Ti-50%Al비정분말;재통과1000℃/1 h열압,득도치밀도위96%적Ti-50%Al합금。채용X사선연사연구제비과정중적결구연변;이용투사전경대비정분말화치밀TiAl합금적미관형모진행관찰。결과표명,Ti-50%Al혼합분말경과100 h고능구마후전화위무서적비정상,기결구연변과정위:Ti+ Al?Ti(Al)과포화고용체(h.c.p)?비정상。Ti-50%Al 비정분말재수후적열압과정중발생정화,정화온도위660~750℃,정화과정위:비정상?무서?상(h.c.p)??-TiAl상(+?2-Ti3Al상),비정정화후화학성분기본보지불변。Ti-50%Al비정적정화과정여구유고과랭도적과랭액체적형핵과정유사,?상정체이비정결구중존재적h.c.p.정체단족혹이이십면체족전변적h.c.p.정체단족위핵심이형핵화장대。
A powder metallurgical titanium aluminide alloy Ti-50%Al with mean grain size of about 0.15?m, composing entirely of?-TiAl phase was prepared by amorphous crystallization method using amorphous Ti-50%Al (atom fraction) powders as raw materials. The amorphous Ti-50%Al powders were fabricated by mechanically alloying in a planetary ball milling system using Ti and Al powders as raw materials, and then the amorphous Ti-50%Al powders were hot pressed at 1 000℃for 1h to obtain the titanium aluminide alloy, whose relative density is about 96%. X-ray diffraction (XRD) was used to characterize the structure evolution during the mechanically alloying and the process of crystallization;and transmission electron microscope (TEM) was used to characterize the morphologies of the amorphous powders and the titanium aluminide alloy. The results show that, after 100 h milling, the blended powders change into an amorphous phase completely, the process of structural transformation can be described as: Ti+Al?Ti(Al) h.c.p?amorphous. Crystallization occurs at a suitable process during hot pressing in the temperate range of 660~750℃, the process can be described as: amorphous?disordered α phase (H.C.P)?ordered ?-TiAl phase (+ordered ?2-Ti3Al phase), in which the disordered?phase is a metastable phase. During crystallization, it is observed that the chemical compositions maintain invariant, it is supposed that the transformation may be similar to the process of nucleation of undercooling liquid, in which the disordered ? phase may nucleate and grow at the basic of the h.c.p crystalline clusters which is in the amorphous structure or has changed by icosahedral clusters existing in the amorphous structure.