功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2013年
z2期
355-358
,共4页
周新远%汪勇%宋占永%张伟%黄艳斐
週新遠%汪勇%宋佔永%張偉%黃豔斐
주신원%왕용%송점영%장위%황염비
铝合金%喷丸强化%强化层%粗糙度
鋁閤金%噴汍彊化%彊化層%粗糙度
려합금%분환강화%강화층%조조도
aluminum alloy%shot peening strengthening%strengthening layer%roughness
针对装备铝合金在残余拉应力的作用下易发生断裂、服役过程中存在重大安全隐患问题,测试分析研究了喷丸强化处理工艺对铝合金强化层组织结构、粗糙度的影响,并对7A52铝合金喷丸处理前后的样品进行了定性分析与定量分析,研究了丸粒尺寸对晶粒细化及粗糙度的影响。结果表明,通过喷丸强化处理,7A52铝合金表层晶粒明显细化。在表面形成致密的强化层,约为300μm;强化层未出现明显裂纹,强化效果较好;丸粒尺寸对表面晶粒细化影响不大,对材料的表面有重要影响,随着丸粒尺寸的增加,材料表面的粗糙度也增大。
針對裝備鋁閤金在殘餘拉應力的作用下易髮生斷裂、服役過程中存在重大安全隱患問題,測試分析研究瞭噴汍彊化處理工藝對鋁閤金彊化層組織結構、粗糙度的影響,併對7A52鋁閤金噴汍處理前後的樣品進行瞭定性分析與定量分析,研究瞭汍粒呎吋對晶粒細化及粗糙度的影響。結果錶明,通過噴汍彊化處理,7A52鋁閤金錶層晶粒明顯細化。在錶麵形成緻密的彊化層,約為300μm;彊化層未齣現明顯裂紋,彊化效果較好;汍粒呎吋對錶麵晶粒細化影響不大,對材料的錶麵有重要影響,隨著汍粒呎吋的增加,材料錶麵的粗糙度也增大。
침대장비려합금재잔여랍응력적작용하역발생단렬、복역과정중존재중대안전은환문제,측시분석연구료분환강화처리공예대려합금강화층조직결구、조조도적영향,병대7A52려합금분환처리전후적양품진행료정성분석여정량분석,연구료환립척촌대정립세화급조조도적영향。결과표명,통과분환강화처리,7A52려합금표층정립명현세화。재표면형성치밀적강화층,약위300μm;강화층미출현명현렬문,강화효과교호;환립척촌대표면정립세화영향불대,대재료적표면유중요영향,수착환립척촌적증가,재료표면적조조도야증대。
Aluminum alloy is tend to occur hydrogen-induced brittle fracture and has significant security risks in the service process when it under residual tensile stress.The effects of different shot peening processes on the organizational structure and roughness of the aluminum alloy are analyzed.Qualitative and quantitative analysis of aluminum alloy under different shot peening processes are made and the effect of pelleting size on grain re-finement and roughness are researched.The results show that the surface grains of 7A52 aluminum alloy are obviously refined.The more dense strengthening layer can be formed on the aluminum alloy surface,approxi-mately 300μm.The strengthening layer doesn’t have obvious cracks,the effect of shot peening is better.The effect of pills grain size on the surface of grain is little,the effect on the material surface is significant.With the pills grain size increase,the roughness of surface also increases.