功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2013年
z2期
325-329
,共5页
钦兰云%杨光%王维%卞宏友
欽蘭雲%楊光%王維%卞宏友
흠란운%양광%왕유%변굉우
WC%钛合金%耐磨涂层%激光沉积成形%磨损
WC%鈦閤金%耐磨塗層%激光沉積成形%磨損
WC%태합금%내마도층%격광침적성형%마손
WC%titanium alloy%wear resistant coating%laser metal deposition%wear
为了提高 Ti6Al4V 钛合金的耐磨特性,在Ti6Al4V钛合金表面利用激光沉积制备了以 WC 颗粒为强化相的涂层。观察了耐磨涂层的微观组织,并测量了涂层和 Ti6Al4V 基材在室温条件下的摩擦磨损性能及其显微硬度。结果表明,WC 颗粒增强相均匀弥散分布在基体中,颗粒发生了部分熔化,从颗粒中心到基体分布呈现出不同的形态和组分。由于未熔WC颗粒和生成的TiC弥散强化及激光沉积基体组织的细晶强化作用,基材的硬度和耐磨性均得到了提高。在相同的摩擦磨损条件下,基材的体积磨损量是复合涂层的55.2倍。
為瞭提高 Ti6Al4V 鈦閤金的耐磨特性,在Ti6Al4V鈦閤金錶麵利用激光沉積製備瞭以 WC 顆粒為彊化相的塗層。觀察瞭耐磨塗層的微觀組織,併測量瞭塗層和 Ti6Al4V 基材在室溫條件下的摩抆磨損性能及其顯微硬度。結果錶明,WC 顆粒增彊相均勻瀰散分佈在基體中,顆粒髮生瞭部分鎔化,從顆粒中心到基體分佈呈現齣不同的形態和組分。由于未鎔WC顆粒和生成的TiC瀰散彊化及激光沉積基體組織的細晶彊化作用,基材的硬度和耐磨性均得到瞭提高。在相同的摩抆磨損條件下,基材的體積磨損量是複閤塗層的55.2倍。
위료제고 Ti6Al4V 태합금적내마특성,재Ti6Al4V태합금표면이용격광침적제비료이 WC 과립위강화상적도층。관찰료내마도층적미관조직,병측량료도층화 Ti6Al4V 기재재실온조건하적마찰마손성능급기현미경도。결과표명,WC 과립증강상균균미산분포재기체중,과립발생료부분용화,종과립중심도기체분포정현출불동적형태화조분。유우미용WC과립화생성적TiC미산강화급격광침적기체조직적세정강화작용,기재적경도화내마성균득도료제고。재상동적마찰마손조건하,기재적체적마손량시복합도층적55.2배。
To improve the wear resistance of Ti6Al4V alloy surface,Ti-matrix gradient composite coatings rein-forced by WC particles were deposited by laser metal deposition(LMD)process on Ti6Al4V substrate.The mi-crostructure and worn surface were investigated,and the coatings microhardness and friction wear properties of the coatings and substrate were examined in air.The results show that the WC reinforced phases distribute on deposition layers evenly and the particles melt down partially which shows different morphology and compo-nent.Microhardness analysis indicates that the hardness shows gradient ascent from the substrate to the coat-ings surface,and the wear resistance of coatings has improved 55.2 times compared with substrate.High micro-hardness and good wear resistance property are due to the small grain size and dispersion strengthening of un-melted WC and TiC particles generated in LMD process.