山东冶金
山東冶金
산동야금
SHANDONG METALLURY
2013年
6期
17-18,20
,共3页
吴会亮%衣忠文%霍孝新%黄少文
吳會亮%衣忠文%霍孝新%黃少文
오회량%의충문%곽효신%황소문
模具钢%LGP20CH%预硬化%热处理%硬度
模具鋼%LGP20CH%預硬化%熱處理%硬度
모구강%LGP20CH%예경화%열처리%경도
die steel%LGP20CH%pre-hardening%heat treatment%hardness
通过合理的化学成分设计,采用转炉、LF、RH、连铸、控制轧制与预硬化热处理工艺,成功开发出LGP20CH模具用钢并批量生产。实物质量检验表明,钢板钢质纯净度高,主要为B类夹杂物,级别在1.5级以下,钢板组织为回火索氏体,晶粒度达到9级以上,100%超声波检验合格,无气孔、针眼缺陷;整张钢板硬度波动值不超过4 HRC,完全满足用户使用要求。
通過閤理的化學成分設計,採用轉爐、LF、RH、連鑄、控製軋製與預硬化熱處理工藝,成功開髮齣LGP20CH模具用鋼併批量生產。實物質量檢驗錶明,鋼闆鋼質純淨度高,主要為B類夾雜物,級彆在1.5級以下,鋼闆組織為迴火索氏體,晶粒度達到9級以上,100%超聲波檢驗閤格,無氣孔、針眼缺陷;整張鋼闆硬度波動值不超過4 HRC,完全滿足用戶使用要求。
통과합리적화학성분설계,채용전로、LF、RH、련주、공제알제여예경화열처리공예,성공개발출LGP20CH모구용강병비량생산。실물질량검험표명,강판강질순정도고,주요위B류협잡물,급별재1.5급이하,강판조직위회화색씨체,정립도체도9급이상,100%초성파검험합격,무기공、침안결함;정장강판경도파동치불초과4 HRC,완전만족용호사용요구。
Through the reasonable chemical composition design and adopting the converter-LF-RH-continuous casting-controlled rolling-pre-hardening process, LGP20CH die steel was successfully developed and was entered batch production now. The product quality inspection showed that the plates have a high purity with B type inclusions below 1.5 level, the microstructure of plates is tempered sorbite, the grain size of plates is above 9 grade, and all of plates have passed the ultrasonic testing, without blowhole, pinhole defects;Moreover, the hardness fluctuation of whole plate is within 4 HRC, completely meeting user’s requirements.