CAJ | 학술논문

根据食品级超薄电镀锡基板质量要求，通过优化酸洗工艺参数，乳化液理化指标，碱液、电解液的温度、浓度和漂洗水的电导率，提高了产品的表面质量；通过研究HC六辊轧机中间辊横移位置与板形的对应关系，调整工作辊的弯辊量，提高了产品的板形质量；采用全氢强循环光亮罩式退火技术，通过优化退火工艺，保证了产品的物理性能。泰钢成功开发出了食品级超薄电镀锡基板，产品达到了高级表面精度（FC），不平度在2 mm以下，宽度偏差在0～3 mm以内，厚度偏差在-0.02～0 mm以内，硬度达到了T3要求。
근거식품급초박전도석기판질량요구，통과우화산세공예삼수，유화액이화지표，감액、전해액적온도、농도화표세수적전도솔，제고료산품적표면질량；통과연구HC륙곤알궤중간곤횡이위치여판형적대응관계，조정공작곤적만곤량，제고료산품적판형질량；채용전경강순배광량조식퇴화기술，통과우화퇴화공예，보증료산품적물이성능。태강성공개발출료식품급초박전도석기판，산품체도료고급표면정도（FC），불평도재2 mm이하，관도편차재0～3 mm이내，후도편차재-0.02～0 mm이내，경도체도료T3요구。
According to the quality requirements of food grade ultra-thin electroplating tin substrates, by optimizing the pickling parameters, physiochemical index of emulsion, the temperature and concentration of alkali liquor and electrolyte and the conductivity of rinsing water, the surface quality of the products was improved. By studying the relationship between the traversing positions of intermediate roll of HC six-roll mill and the shape and adjusting the amount of work roll bending roll, the shape quality was improved. All-hydrogen strong cyclic bright batch annealing technology was adopted and by optimizing the annealing process, the physical properties were insured. Therefore, Taishan Steel successfully developed the food grade ultra-thin electroplating tin substrates. The products have high surface precision (FC), the unevenness is less than 2 mm, the deviation of width is within 0-3 mm, the deviation of thickness is within-0.02-0 mm and the hardness meets the T3 requirements.