红外与激光工程
紅外與激光工程
홍외여격광공정
INFRARED AND LASER ENGINEERING
2013年
12期
3196-3200
,共5页
郭腾霄%丁学全%董晓强%穆宁%黄启斌%李翠萍%温红宇
郭騰霄%丁學全%董曉彊%穆寧%黃啟斌%李翠萍%溫紅宇
곽등소%정학전%동효강%목저%황계빈%리취평%온홍우
信号处理%红外遥测%光谱%EMD
信號處理%紅外遙測%光譜%EMD
신호처리%홍외요측%광보%EMD
signal processing%IR remote sensing%spectrum%EMD
利用红外遥测光谱仪远距离快速、准确地探测污染气体并给出定性鉴别结果,必须对遥测光谱进行预处理,消除高频噪声和低频基线的干扰,提取出污染气体的特征光谱信号。针对现有方法的不足,提出采用具有自适应特性的EMD方法,对光谱信号进行无参数分解,提取出高频噪声与低频基线,实现了红外遥测光谱的预处理。经过该方法处理,光谱信号全局评估系数RMS1平均值达到0.141,局部评估系数RMS2平均值达到0.182,综合评估系数RMS*平均值达到0.026,明显优于小波方法。实验结果表明,EMD方法用于红外遥测光谱信号去噪与基线校正,算法简单,运行可靠,可使问题得到有效解决。
利用紅外遙測光譜儀遠距離快速、準確地探測汙染氣體併給齣定性鑒彆結果,必鬚對遙測光譜進行預處理,消除高頻譟聲和低頻基線的榦擾,提取齣汙染氣體的特徵光譜信號。針對現有方法的不足,提齣採用具有自適應特性的EMD方法,對光譜信號進行無參數分解,提取齣高頻譟聲與低頻基線,實現瞭紅外遙測光譜的預處理。經過該方法處理,光譜信號全跼評估繫數RMS1平均值達到0.141,跼部評估繫數RMS2平均值達到0.182,綜閤評估繫數RMS*平均值達到0.026,明顯優于小波方法。實驗結果錶明,EMD方法用于紅外遙測光譜信號去譟與基線校正,算法簡單,運行可靠,可使問題得到有效解決。
이용홍외요측광보의원거리쾌속、준학지탐측오염기체병급출정성감별결과,필수대요측광보진행예처리,소제고빈조성화저빈기선적간우,제취출오염기체적특정광보신호。침대현유방법적불족,제출채용구유자괄응특성적EMD방법,대광보신호진행무삼수분해,제취출고빈조성여저빈기선,실현료홍외요측광보적예처리。경과해방법처리,광보신호전국평고계수RMS1평균치체도0.141,국부평고계수RMS2평균치체도0.182,종합평고계수RMS*평균치체도0.026,명현우우소파방법。실험결과표명,EMD방법용우홍외요측광보신호거조여기선교정,산법간단,운행가고,가사문제득도유효해결。
To detect and identify pollutant gases in the distance speedily and accurately with IR remote sensing spectrometer,it is necessary to remove high-frequency noise and low-frequency baseline,of which the purpose is to extract feature information. For the deficiencies of the existing methods, EMD was proposed to preprocess IR remote sensing spectrum. EMD is a preprocessing algorithm which works self-adaptively and without parameters. After High-frequency noise and low-frequency baseline was removed, the global assessment factor RMS1, the partial assessment factor RMS2, and the comprehensive assessment factor RMS* reached 0.141, 0.182 and 0.026 respectively. The perfomace of EMD is better than wavelet decomposition method obviously.The result shows that EMD is convenient and reliable for denoising and baseline correction of IR remote sensing spectrum.