价值工程
價值工程
개치공정
VALUE ENGINEERING
2014年
1期
316-317
,共2页
成核剂%无规聚丙烯%高流动%注塑
成覈劑%無規聚丙烯%高流動%註塑
성핵제%무규취병희%고류동%주소
nucleating agents%atactic polypropylene%high-flow%injection molding
通过成核剂改性高流动无规聚丙烯注塑专用料性能的研究发现：加入成核剂均有不同程度改善PPR的力学性能，NX8000改性PPR的弯曲模量、弯曲强度、冲击强度、洛氏硬度分别提高了8.0%、13.4%、3.0%、8.1%；雾度降低了82.7%、结晶度增加了3益，成型加工温度降低了40益。
通過成覈劑改性高流動無規聚丙烯註塑專用料性能的研究髮現：加入成覈劑均有不同程度改善PPR的力學性能，NX8000改性PPR的彎麯模量、彎麯彊度、遲擊彊度、洛氏硬度分彆提高瞭8.0%、13.4%、3.0%、8.1%；霧度降低瞭82.7%、結晶度增加瞭3益，成型加工溫度降低瞭40益。
통과성핵제개성고류동무규취병희주소전용료성능적연구발현：가입성핵제균유불동정도개선PPR적역학성능，NX8000개성PPR적만곡모량、만곡강도、충격강도、락씨경도분별제고료8.0%、13.4%、3.0%、8.1%；무도강저료82.7%、결정도증가료3익，성형가공온도강저료40익。
Through the research of nucleating agents modifies high-flow atactic polypropylene injection molding compound's performance, we find that: adding nucleating agents could improve the mechanical properties of PPR with different degree; the flexural modulus, bending strength, impact strength and rockwell hardness of NX8000 modified PPR respectively increased by 8.0%, 13.4%, 3.0%, 8.1%;haze reduced by 82.7%;crystallinity increased 3℃and molding temperature reduced 40℃.
