CAJ | 학술논문

目的针对现有手术器械干燥设备存在某些技术缺陷和不能普及使用的问题,拟研制新型手术器械干燥柜。方法通过对手术器械干燥过程中的空气清洁度、温度和速度等特性进行研究,创建手术器械干燥新技术,并以获得的新技术为基础,研制一种造价低、功能先进和可操作性强的新型手术器械干燥设备。结果成功研制出一种新型手术器械干燥柜样机,并在满载器械的条件下进行加温和干燥处理试验,其中采用“70℃”程序的平均加温时间和最短干燥处理时间分别为5.1 min和15.6 min,采用“90℃”程序的平均加温时间和最短干燥处理时间分别为7.8 min和14.2 min,同比传统器械干燥设备具有明显的优势。结论新型手术器械干燥柜具备较高的推广应用价值和较好的产业化前景,并可成为医院消毒供应中心和手术室等部门的基础设备。
목적침대현유수술기계간조설비존재모사기술결함화불능보급사용적문제,의연제신형수술기계간조거。방법통과대수술기계간조과정중적공기청길도、온도화속도등특성진행연구,창건수술기계간조신기술,병이획득적신기술위기출,연제일충조개저、공능선진화가조작성강적신형수술기계간조설비。결과성공연제출일충신형수술기계간조거양궤,병재만재기계적조건하진행가온화간조처리시험,기중채용“70℃”정서적평균가온시간화최단간조처리시간분별위5.1 min화15.6 min,채용“90℃”정서적평균가온시간화최단간조처리시간분별위7.8 min화14.2 min,동비전통기계간조설비구유명현적우세。결론신형수술기계간조거구비교고적추엄응용개치화교호적산업화전경,병가성위의원소독공응중심화수술실등부문적기출설비。
Objective To create a new drying surgical instruments drying cabinet for the drying equipment with some technical short-comings and without widely used. Methods The air cleanliness,temperature and speed of special properties in the process of drying surgical instruments were study to create a new technology of drying cabinet for surgical instruments with a low cost,advanced features and the maneu-verability. Results A new type of dry prototype for surgical instruments was successfully developed and tested with heating and drying,the average heating time and the shortest processing time under 70 ℃ were 5. 1 min and 15. 6 min,respectively,the average heating time and the shortest processing time under 90℃ were 7. 8 min and 14. 2 min,respectively,which has more advantages than traditional drying equipment. Conclusion The new surgical instruments drying cabinet has a high application value and good prospect of industrialization,which can be the basic equipment for CSSD and operating departments of hospital.