中国钨业
中國鎢業
중국오업
CHINA TUNGSTEN INDUSTRY
2013年
6期
38-41
,共4页
杨新华%许亮%周洁英%欧阳红%陈冬英
楊新華%許亮%週潔英%歐暘紅%陳鼕英
양신화%허량%주길영%구양홍%진동영
钨钽铌粗精矿%钨%钽铌%碱分解
鎢鐽鈮粗精礦%鎢%鐽鈮%堿分解
오단니조정광%오%단니%감분해
tungsten-tantalum-niobium rough concentrate%tungsten%tantalum and niobium%alkaline decomposition
针对难分解钨钽铌粗精矿的冶炼问题,采用了高压碱分解工艺,成功地实现了钨钽铌精矿中钨难分解的问题。研究针对江西某大型钨、钽铌矿床矿石重选矿泥,经选矿试验获得的钨钽铌粗精矿,探讨了NaOH加入量、Na3PO4·12H2O加入量、液固比、分解温度、分解压力、分解时间对钨分解率的影响。结果表明,NaOH加入量为理论量的1.70倍,Na3PO4·12H2O加入量为理论量的1.26倍,液固比为3,分解温度200℃,分解压力1.5 MPa,分解时间5 h,钨的分解率能达到99.84%,分解渣中WO3含量为0.16%。
針對難分解鎢鐽鈮粗精礦的冶煉問題,採用瞭高壓堿分解工藝,成功地實現瞭鎢鐽鈮精礦中鎢難分解的問題。研究針對江西某大型鎢、鐽鈮礦床礦石重選礦泥,經選礦試驗穫得的鎢鐽鈮粗精礦,探討瞭NaOH加入量、Na3PO4·12H2O加入量、液固比、分解溫度、分解壓力、分解時間對鎢分解率的影響。結果錶明,NaOH加入量為理論量的1.70倍,Na3PO4·12H2O加入量為理論量的1.26倍,液固比為3,分解溫度200℃,分解壓力1.5 MPa,分解時間5 h,鎢的分解率能達到99.84%,分解渣中WO3含量為0.16%。
침대난분해오단니조정광적야련문제,채용료고압감분해공예,성공지실현료오단니정광중오난분해적문제。연구침대강서모대형오、단니광상광석중선광니,경선광시험획득적오단니조정광,탐토료NaOH가입량、Na3PO4·12H2O가입량、액고비、분해온도、분해압력、분해시간대오분해솔적영향。결과표명,NaOH가입량위이론량적1.70배,Na3PO4·12H2O가입량위이론량적1.26배,액고비위3,분해온도200℃,분해압력1.5 MPa,분해시간5 h,오적분해솔능체도99.84%,분해사중WO3함량위0.16%。
A mechano-chemical technology was developed for the refractory tantalum-niobium-tungsten coarse concentrate adopting high pressure alkali decomposition process. Using the tungsten-tantalum-niobium rough concentrate out of the beneficiation tests in a large sized tungsten-tantalum-niobium ore, this paper studies the effects of adding amounts of NaOH and Na3PO4 ·12H2O, liquid to solid ratio, decomposition temperature, decomposition pressure and decomposition time on tungsten decomposition rate. The results show that, the decomposition rate of tungsten can reach 99.84%, 0.16%WO3 content in slag (the theoretical amount of NaOH content is 1.7 times of the theoretical amount, the theoretical amount of Na3PO4·12H2O content is 1.26 times of the theoretical amount, ratio of liquid to solid 3, decomposition temperature 200℃, decomposition pressure of 1.5 MPa, the decomposition time is 5 h).