石化技术与应用
石化技術與應用
석화기술여응용
PETROCHEMICAL TECHNOLOGY & APPLICATION
2014年
3期
251-254
,共4页
宋阳%黄文氢%魏新宇%张颖
宋暘%黃文氫%魏新宇%張穎
송양%황문경%위신우%장영
乙烯聚合催化剂%含镁质量分数%含铝质量分数%含钛质量分数%分析测试
乙烯聚閤催化劑%含鎂質量分數%含鋁質量分數%含鈦質量分數%分析測試
을희취합최화제%함미질량분수%함려질량분수%함태질량분수%분석측시
ethylene polymerization catalyst%magnesium mass fraction%aluminum mass fraction%titanium mass fraction%analysis test
在美国Agilent公司制造的7500 CX型电感耦合等离子体质谱仪上,以硝酸为消解试剂,采用外标曲线结合内标校正法,建立了用于测定乙烯聚合Ti-Mg-Al催化剂的Mg,Al,Ti元素质量分数的定量分析法.结果表明,该方法可以同时测定催化剂中Mg,Al,Ti的元素质量分数.所测定的各元素计数值的长周期稳定性、试样的稀释重复性及试样分析的重复性均很好,三者相对标准偏差分别低于3.0%,5.0%(综合值),4.0%.各元素的加标回收率为96%~101%.
在美國Agilent公司製造的7500 CX型電感耦閤等離子體質譜儀上,以硝痠為消解試劑,採用外標麯線結閤內標校正法,建立瞭用于測定乙烯聚閤Ti-Mg-Al催化劑的Mg,Al,Ti元素質量分數的定量分析法.結果錶明,該方法可以同時測定催化劑中Mg,Al,Ti的元素質量分數.所測定的各元素計數值的長週期穩定性、試樣的稀釋重複性及試樣分析的重複性均很好,三者相對標準偏差分彆低于3.0%,5.0%(綜閤值),4.0%.各元素的加標迴收率為96%~101%.
재미국Agilent공사제조적7500 CX형전감우합등리자체질보의상,이초산위소해시제,채용외표곡선결합내표교정법,건립료용우측정을희취합Ti-Mg-Al최화제적Mg,Al,Ti원소질량분수적정량분석법.결과표명,해방법가이동시측정최화제중Mg,Al,Ti적원소질량분수.소측정적각원소계수치적장주기은정성、시양적희석중복성급시양분석적중복성균흔호,삼자상대표준편차분별저우3.0%,5.0%(종합치),4.0%.각원소적가표회수솔위96%~101%.