西南石油大学学报(自然科学版)
西南石油大學學報(自然科學版)
서남석유대학학보(자연과학판)
JOURNAL OF SOUTHWEST PETROLEUM UNIVERSITY(SEIENCE & TECHNOLOGY EDITION)
2014年
1期
129-133
,共5页
稠油%相对渗透率%误差%死体积%校正
稠油%相對滲透率%誤差%死體積%校正
주유%상대삼투솔%오차%사체적%교정
heavy oil%relative permeability%error%dead volume%correction
稠油相对渗透率曲线是稠油油藏开发动态预测过程的重要基础数据,稠油相对渗透率实验测量过程中的误差将会给油田开发分析传递错误信息。在稠油油藏相渗实验过程中,由于实验温度高,出口端计量管线长,系统死体积较大,死体积孔隙中水驱油规律和死体积校正方法会对实验结果产生重要影响。在常规实验管线中进行的水驱油实验发现,死体积管线中的原油不能全部被驱替出来,且管线中存在油水两相流动过程。油水黏度越高、驱替速度越快,则管线中的原油采出程度越低;实验过程还存在压力测量和体积计量不同步现象,产出流体体积计量滞后于压力测量。采用简单扣除管线孔隙体积来处理死体积的常规方法会使产油量计量产生较大误差,导致实验结果偏离真实流动情况,对此给出了相应的校正方法。
稠油相對滲透率麯線是稠油油藏開髮動態預測過程的重要基礎數據,稠油相對滲透率實驗測量過程中的誤差將會給油田開髮分析傳遞錯誤信息。在稠油油藏相滲實驗過程中,由于實驗溫度高,齣口耑計量管線長,繫統死體積較大,死體積孔隙中水驅油規律和死體積校正方法會對實驗結果產生重要影響。在常規實驗管線中進行的水驅油實驗髮現,死體積管線中的原油不能全部被驅替齣來,且管線中存在油水兩相流動過程。油水黏度越高、驅替速度越快,則管線中的原油採齣程度越低;實驗過程還存在壓力測量和體積計量不同步現象,產齣流體體積計量滯後于壓力測量。採用簡單釦除管線孔隙體積來處理死體積的常規方法會使產油量計量產生較大誤差,導緻實驗結果偏離真實流動情況,對此給齣瞭相應的校正方法。
주유상대삼투솔곡선시주유유장개발동태예측과정적중요기출수거,주유상대삼투솔실험측량과정중적오차장회급유전개발분석전체착오신식。재주유유장상삼실험과정중,유우실험온도고,출구단계량관선장,계통사체적교대,사체적공극중수구유규률화사체적교정방법회대실험결과산생중요영향。재상규실험관선중진행적수구유실험발현,사체적관선중적원유불능전부피구체출래,차관선중존재유수량상류동과정。유수점도월고、구체속도월쾌,칙관선중적원유채출정도월저;실험과정환존재압력측량화체적계량불동보현상,산출류체체적계량체후우압력측량。채용간단구제관선공극체적래처리사체적적상규방법회사산유량계양산생교대오차,도치실험결과편리진실류동정황,대차급출료상응적교정방법。
The heavy oil relative permeability curve is an important parameter in heavy oil reservoir performance prediction. The error in the relative permeability test caused by experimental factors will result in wrong information for reservoir devel-opment analysis. Due to the long exit end pipeline and more dead volume in the high temperature relative permeability test,the oil-water phases flowing law in the exit end pipeline of core holder and method of dead volume calibration will have important effect on relative permeability experimental results. The phenomenon of non-piston like displacement and pressure hysteresis effect have been discovered based on the water flooding experiment of heavy oil in the exit end pipeline. The breakthrough recovery and ultimate recovery factor decrease with increasing oil viscosity and water drive velocity,and the metering oil vol-ume is behind the data corresponding to the pressure. The conventional data correction by oil volume deducting space volume of pipeline may lead to the deviation of experimental results from the actual flow behavior,so a new method of data calibration is proposed.