电力系统保护与控制
電力繫統保護與控製
전력계통보호여공제
POWER SYSTM PROTECTION AND CONTROL
2014年
3期
141-145
,共5页
李旭%黄继东%倪传坤%郝惠贞%冉志勇%都磊
李旭%黃繼東%倪傳坤%郝惠貞%冉誌勇%都磊
리욱%황계동%예전곤%학혜정%염지용%도뢰
电流互感器%差动保护%虚拟制动%CT饱和
電流互感器%差動保護%虛擬製動%CT飽和
전류호감기%차동보호%허의제동%CT포화
current transformer%differential protection%virtual brake%CT saturation
分析了电磁式电流互感器和电子式电流互感器暂态特性的差异,提出了采用差分虚拟制动CT饱和开放的办法来解决不同互感器混用时线路光纤差动保护饱和误开放的问题。该方法能够有效解决因暂态传递特性不一致引起的饱和误开放问题。此外由于电子互感器二次时间常数与常规互感器有较大差异,导致在故障切除后电子互感器侧电流拖尾,会造成开关跳开后线路保护仍计算有差流,同时保护各侧电流互感器的二次电流衰减时间常数不一致也存在导致差动保护在区外故障电流切除时误动作。提出使用全周差分傅氏计算保护跳开相的电流,以避免造成线路保护跳令不能及时收回导致误启动失灵以及区外故障切除引起差动误动的问题。
分析瞭電磁式電流互感器和電子式電流互感器暫態特性的差異,提齣瞭採用差分虛擬製動CT飽和開放的辦法來解決不同互感器混用時線路光纖差動保護飽和誤開放的問題。該方法能夠有效解決因暫態傳遞特性不一緻引起的飽和誤開放問題。此外由于電子互感器二次時間常數與常規互感器有較大差異,導緻在故障切除後電子互感器側電流拖尾,會造成開關跳開後線路保護仍計算有差流,同時保護各側電流互感器的二次電流衰減時間常數不一緻也存在導緻差動保護在區外故障電流切除時誤動作。提齣使用全週差分傅氏計算保護跳開相的電流,以避免造成線路保護跳令不能及時收迴導緻誤啟動失靈以及區外故障切除引起差動誤動的問題。
분석료전자식전류호감기화전자식전류호감기잠태특성적차이,제출료채용차분허의제동CT포화개방적판법래해결불동호감기혼용시선로광섬차동보호포화오개방적문제。해방법능구유효해결인잠태전체특성불일치인기적포화오개방문제。차외유우전자호감기이차시간상수여상규호감기유교대차이,도치재고장절제후전자호감기측전류타미,회조성개관도개후선로보호잉계산유차류,동시보호각측전류호감기적이차전류쇠감시간상수불일치야존재도치차동보호재구외고장전류절제시오동작。제출사용전주차분부씨계산보호도개상적전류,이피면조성선로보호도령불능급시수회도치오계동실령이급구외고장절제인기차동오동적문제。
This paper analyzes the difference of transient characteristics of magnetic current transformer and electronic current transformer, and proposes to adopt the method of difference virtual brake CT saturated open to solve the problem of saturation mis open of line optical differential protection when different CTs are used mixedly. This method can effectively solve saturation mis open caused by inconsistent transient transfer characteristics. In addition, secondary time constant of electronic transformer has great difference from that of conventional current transformer, and it results in the current trailing of electronic transformer after fault excision, which can cause line protection still has calculation of differential flow after switch off. And the inconsistent secondary current attenuation time constants of CT at each side of protection can lead to misoperation of differential protection in cutting off the external fault. This paper puts forward the full-circle differential Fourier to calculate the current of jumped phase of protection, in order to avoid mal-start failure caused by not withdrawing jump command of line protection in time and the differential maloperation owing to cutting off external fault.