功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2014年
3期
03130-03134,03140
,共6页
氧化铬涂层%热处理%超音速火焰喷涂%耐磨减摩性能%磨损机制
氧化鉻塗層%熱處理%超音速火燄噴塗%耐磨減摩性能%磨損機製
양화락도층%열처리%초음속화염분도%내마감마성능%마손궤제
chromium oxide coating%heat treatment%HVOF spraying%wear&friction resistance%wear mechanism
采用箱式电阻炉对超音速火焰喷涂氧化铬陶瓷涂层进行热处理,利用显微硬度计、扫描电子显微镜(SEM)、能谱分析仪(EDS)和摩擦磨损试验机等设备,研究热处理温度对氧化铬涂层室温条件下干摩擦性能的影响,并讨论涂层的磨损机制。结果表明,在实验条件下,500℃热处理涂层的综合耐磨减摩性能最好。热处理未能改变涂层的磨损机制,在10 N 载荷下,涂层的磨损机制以磨粒磨损为主,并伴有轻微的剥落磨损;而在25 N 载荷下,涂层的磨损机制则以剥落磨损为主,并伴有磨粒磨损。
採用箱式電阻爐對超音速火燄噴塗氧化鉻陶瓷塗層進行熱處理,利用顯微硬度計、掃描電子顯微鏡(SEM)、能譜分析儀(EDS)和摩抆磨損試驗機等設備,研究熱處理溫度對氧化鉻塗層室溫條件下榦摩抆性能的影響,併討論塗層的磨損機製。結果錶明,在實驗條件下,500℃熱處理塗層的綜閤耐磨減摩性能最好。熱處理未能改變塗層的磨損機製,在10 N 載荷下,塗層的磨損機製以磨粒磨損為主,併伴有輕微的剝落磨損;而在25 N 載荷下,塗層的磨損機製則以剝落磨損為主,併伴有磨粒磨損。
채용상식전조로대초음속화염분도양화락도자도층진행열처리,이용현미경도계、소묘전자현미경(SEM)、능보분석의(EDS)화마찰마손시험궤등설비,연구열처리온도대양화락도층실온조건하간마찰성능적영향,병토론도층적마손궤제。결과표명,재실험조건하,500℃열처리도층적종합내마감마성능최호。열처리미능개변도층적마손궤제,재10 N 재하하,도층적마손궤제이마립마손위주,병반유경미적박락마손;이재25 N 재하하,도층적마손궤제칙이박락마손위주,병반유마립마손。
Heat treatments of the HVOF sprayed chromium oxide coating were performed in chamber electric furnace.Effects of heat treatment temperature on dry tribological properties and wear mechanism of the coating were studied by microhardness testing machine,scanning electron microcopy (SEM),energy-dispersive spec-troscopy (EDS)and friction wear testing machine.Results indicate that comprehensive wear & friction resist-ance of the coating after heat treatment at 500 ℃ were the best under the experimental condition in this paper. Heat treatment doesn’t alter wear mechanism of the coating.The main wear mechanisms of the coating were abrasive wear and slight spalling at 10 N load,but at 25 N load,spalling was the main wear mechanism and ab-rasive wear also exist.