武汉工程大学学报
武漢工程大學學報
무한공정대학학보
JOURNAL OF WUHAN INSTITUTE OF TECHNOLOGY
2013年
12期
59-62
,共4页
钾离子%质量浓度%原子光谱
鉀離子%質量濃度%原子光譜
갑리자%질량농도%원자광보
potassium ion%concentration%atomic spectrum
测量循环冷却水中钾离子质量浓度,以此来计算循环水浓缩倍数、调节新鲜水的加入量是工厂维持热平衡的重要手段.为了比较、优化各种测量钾离子质量浓度的原子光谱方法,配制钾标准溶液,选择合适的仪器条件,分别用火焰原子吸收、火焰原子发射、电感耦合等离子体原子发射测定了循环冷却水中的钾离子质量浓度.针对不同测量方法的线性范围、检出限、准确度等进行了对比讨论,确定了3种方法的最佳测量条件、各自的测量特性以及测量范围,比较了3种方法的优劣.结果表明3种方法都能定量测量出钾离子质量浓度:其中电感耦合等离子体原子发射有较佳的测量效果,但是价格昂贵,不利于例行分析;两种火焰原子方法测量性能接近,火焰原子发射硬件条件要求低,是测量碱金属的较佳方法.不同方法的比较为工厂根据实际条件进行选择提供了依据.
測量循環冷卻水中鉀離子質量濃度,以此來計算循環水濃縮倍數、調節新鮮水的加入量是工廠維持熱平衡的重要手段.為瞭比較、優化各種測量鉀離子質量濃度的原子光譜方法,配製鉀標準溶液,選擇閤適的儀器條件,分彆用火燄原子吸收、火燄原子髮射、電感耦閤等離子體原子髮射測定瞭循環冷卻水中的鉀離子質量濃度.針對不同測量方法的線性範圍、檢齣限、準確度等進行瞭對比討論,確定瞭3種方法的最佳測量條件、各自的測量特性以及測量範圍,比較瞭3種方法的優劣.結果錶明3種方法都能定量測量齣鉀離子質量濃度:其中電感耦閤等離子體原子髮射有較佳的測量效果,但是價格昂貴,不利于例行分析;兩種火燄原子方法測量性能接近,火燄原子髮射硬件條件要求低,是測量堿金屬的較佳方法.不同方法的比較為工廠根據實際條件進行選擇提供瞭依據.
측량순배냉각수중갑리자질량농도,이차래계산순배수농축배수、조절신선수적가입량시공엄유지열평형적중요수단.위료비교、우화각충측량갑리자질량농도적원자광보방법,배제갑표준용액,선택합괄적의기조건,분별용화염원자흡수、화염원자발사、전감우합등리자체원자발사측정료순배냉각수중적갑리자질량농도.침대불동측량방법적선성범위、검출한、준학도등진행료대비토론,학정료3충방법적최가측량조건、각자적측량특성이급측량범위,비교료3충방법적우렬.결과표명3충방법도능정량측량출갑리자질량농도:기중전감우합등리자체원자발사유교가적측량효과,단시개격앙귀,불리우례행분석;량충화염원자방법측량성능접근,화염원자발사경건조건요구저,시측량감금속적교가방법.불동방법적비교위공엄근거실제조건진행선택제공료의거.