天然气工业
天然氣工業
천연기공업
NATURAL GASINDUSTRY
2013年
5期
65-68
,共4页
吴国涛%胥云%杨振周%杨立峰%张静
吳國濤%胥雲%楊振週%楊立峰%張靜
오국도%서운%양진주%양립봉%장정
支撑剂嵌入%支撑裂缝%导流能力%嵌入程度%数值模拟%计算
支撐劑嵌入%支撐裂縫%導流能力%嵌入程度%數值模擬%計算
지탱제감입%지탱렬봉%도류능력%감입정도%수치모의%계산
目前支撑剂粒径、铺置浓度、嵌入程度对裂缝导流能力的影响主要为实验研究,缺乏相应的理论计算模型研究,而理论计算模型会促使压裂方案设计更加合理、可靠,增加施工的成功率,达到预期的改造效果.为此,根据Carman Kozeny公式,建立了一种考虑支撑剂在岩石表面嵌入的支撑裂缝导流能力数值计算模型,利用实验数据对理论模型进行拟合校正,并通过校正后的理论模型计算了20~40目、30~50目和40~70目支撑剂在不同铺置层数、不同嵌入程度条件下的裂缝导流能力,分析了铺置层数、嵌入程度对导流能力的影响.结果表明:支撑剂粒径越大、铺置层数越多,裂缝导流能力越大;在单层铺置情况下,嵌入程度对导流能力的影响较大,嵌入程度从0增加到33 %,导流能力降低85%.所建立的模型为致密油、页岩气等不同类型储层的粒径优选、砂比优化提供了参考和依据,也为后续考虑支撑剂嵌入的相关软件研究提供了理论模型.
目前支撐劑粒徑、鋪置濃度、嵌入程度對裂縫導流能力的影響主要為實驗研究,缺乏相應的理論計算模型研究,而理論計算模型會促使壓裂方案設計更加閤理、可靠,增加施工的成功率,達到預期的改造效果.為此,根據Carman Kozeny公式,建立瞭一種攷慮支撐劑在巖石錶麵嵌入的支撐裂縫導流能力數值計算模型,利用實驗數據對理論模型進行擬閤校正,併通過校正後的理論模型計算瞭20~40目、30~50目和40~70目支撐劑在不同鋪置層數、不同嵌入程度條件下的裂縫導流能力,分析瞭鋪置層數、嵌入程度對導流能力的影響.結果錶明:支撐劑粒徑越大、鋪置層數越多,裂縫導流能力越大;在單層鋪置情況下,嵌入程度對導流能力的影響較大,嵌入程度從0增加到33 %,導流能力降低85%.所建立的模型為緻密油、頁巖氣等不同類型儲層的粒徑優選、砂比優化提供瞭參攷和依據,也為後續攷慮支撐劑嵌入的相關軟件研究提供瞭理論模型.
목전지탱제립경、포치농도、감입정도대렬봉도류능력적영향주요위실험연구,결핍상응적이론계산모형연구,이이론계산모형회촉사압렬방안설계경가합리、가고,증가시공적성공솔,체도예기적개조효과.위차,근거Carman Kozeny공식,건립료일충고필지탱제재암석표면감입적지탱렬봉도류능력수치계산모형,이용실험수거대이론모형진행의합교정,병통과교정후적이론모형계산료20~40목、30~50목화40~70목지탱제재불동포치층수、불동감입정도조건하적렬봉도류능력,분석료포치층수、감입정도대도류능력적영향.결과표명:지탱제립경월대、포치층수월다,렬봉도류능력월대;재단층포치정황하,감입정도대도류능력적영향교대,감입정도종0증가도33 %,도류능력강저85%.소건립적모형위치밀유、혈암기등불동류형저층적립경우선、사비우화제공료삼고화의거,야위후속고필지탱제감입적상관연건연구제공료이론모형.