广东化工
廣東化工
엄동화공
GUANGDONG CHEMICAL INDUSTRY
2014年
2期
28-29
,共2页
张健强%熊启勇%李德志%赵玲莉
張健彊%熊啟勇%李德誌%趙玲莉
장건강%웅계용%리덕지%조령리
三相泡沫%调剖%汽窜%高温%新疆油田
三相泡沫%調剖%汽竄%高溫%新疆油田
삼상포말%조부%기찬%고온%신강유전
针对新疆油田重32井区齐古组稠油油藏汽窜严重的现状,研制了高温三相泡沫调剖剂GPT-C.在分析封堵汽窜机理的基础上,对封窜性能进行了实验评价,实验结果表明,GPT-C对渗透率5.2 μm2的岩心的封堵率高于85%,突破压力梯度大于6.5 MPa/m,且其封堵性能与所用固相颗粒粒径有关,当固相颗粒粒径为180~270目时,封堵率最大、突破压力梯度最高.在平面非均质并联管实验中,GPT-C能够高效封堵高渗层,高渗岩心的残余阻力系数为低渗岩心的20倍、突破压力为低渗岩心的12倍,因此,GPT-C适用于稠油热采井高温调剖.
針對新疆油田重32井區齊古組稠油油藏汽竄嚴重的現狀,研製瞭高溫三相泡沫調剖劑GPT-C.在分析封堵汽竄機理的基礎上,對封竄性能進行瞭實驗評價,實驗結果錶明,GPT-C對滲透率5.2 μm2的巖心的封堵率高于85%,突破壓力梯度大于6.5 MPa/m,且其封堵性能與所用固相顆粒粒徑有關,噹固相顆粒粒徑為180~270目時,封堵率最大、突破壓力梯度最高.在平麵非均質併聯管實驗中,GPT-C能夠高效封堵高滲層,高滲巖心的殘餘阻力繫數為低滲巖心的20倍、突破壓力為低滲巖心的12倍,因此,GPT-C適用于稠油熱採井高溫調剖.
침대신강유전중32정구제고조주유유장기찬엄중적현상,연제료고온삼상포말조부제GPT-C.재분석봉도기찬궤리적기출상,대봉찬성능진행료실험평개,실험결과표명,GPT-C대삼투솔5.2 μm2적암심적봉도솔고우85%,돌파압력제도대우6.5 MPa/m,차기봉도성능여소용고상과립립경유관,당고상과립립경위180~270목시,봉도솔최대、돌파압력제도최고.재평면비균질병련관실험중,GPT-C능구고효봉도고삼층,고삼암심적잔여조력계수위저삼암심적20배、돌파압력위저삼암심적12배,인차,GPT-C괄용우주유열채정고온조부.