光电工程
光電工程
광전공정
OPTO-ELECTRONIC ENGINEERING
2014年
2期
88-93
,共6页
自发辐射%建模仿真%红外偏振
自髮輻射%建模倣真%紅外偏振
자발복사%건모방진%홍외편진
spontaneous emission%modeling and simulation%IR polarization
光波经过反射后具有偏振特性,目前研究表明热红外自发辐射也具有偏振特性。本文结合基尔霍夫定律以及菲涅耳公式对热红外自发辐射偏振特性进行了初步的理论分析和建模仿真。在低温环境下,采取遮挡措施,进行了热红外自发辐射偏振特性的验证实验,对不同表面状态铝板以及太阳能电池板进行了自发辐射偏振数据的采集。实验结果表明:热红外自发辐射具有偏振特性,并与仿真结果具有一致的变化规律,热红外辐射偏振特性受目标表面粗糙度、材料影响并随着发射角的增加,偏振度不断增加。
光波經過反射後具有偏振特性,目前研究錶明熱紅外自髮輻射也具有偏振特性。本文結閤基爾霍伕定律以及菲涅耳公式對熱紅外自髮輻射偏振特性進行瞭初步的理論分析和建模倣真。在低溫環境下,採取遮擋措施,進行瞭熱紅外自髮輻射偏振特性的驗證實驗,對不同錶麵狀態鋁闆以及太暘能電池闆進行瞭自髮輻射偏振數據的採集。實驗結果錶明:熱紅外自髮輻射具有偏振特性,併與倣真結果具有一緻的變化規律,熱紅外輻射偏振特性受目標錶麵粗糙度、材料影響併隨著髮射角的增加,偏振度不斷增加。
광파경과반사후구유편진특성,목전연구표명열홍외자발복사야구유편진특성。본문결합기이곽부정률이급비열이공식대열홍외자발복사편진특성진행료초보적이론분석화건모방진。재저온배경하,채취차당조시,진행료열홍외자발복사편진특성적험증실험,대불동표면상태려판이급태양능전지판진행료자발복사편진수거적채집。실험결과표명:열홍외자발복사구유편진특성,병여방진결과구유일치적변화규률,열홍외복사편진특성수목표표면조조도、재료영향병수착발사각적증가,편진도불단증가。
Reflected light is partly polarized, and current research shows that thermal infrared emission is also partly polarized. Using Kirchhoff's law and Fresnel formulas, we made preliminary theoretical analysis and some simulation on thermal infrared emission polarization. Under the experimental environment of low temperature and taking shelter measures, we carried out verification experiment of thermal infrared emission polarization and obtained some experimental data of thermal infrared emission polarization of aluminum plates with different surface states and solar panel. Experimental results show that thermal infrared emission is partly polarized, and have consistent variation with the simulation results. Thermal infrared emission polarization is affected by surface roughness and material of the target. With the increase of viewing angle, the degree of polarization increases.