云南师范大学学报(自然科学版)
雲南師範大學學報(自然科學版)
운남사범대학학보(자연과학판)
JOURNAL OF YUNAN NORMAL UNIVERSITY(NATURAL SCIENCES EDITION)
2014年
1期
71-74
,共4页
门自兵%张国栋%李旭东%张新佳
門自兵%張國棟%李旭東%張新佳
문자병%장국동%리욱동%장신가
自蔓延焊条%焊接工艺%密实度%预热%焊接速度
自蔓延銲條%銲接工藝%密實度%預熱%銲接速度
자만연한조%한접공예%밀실도%예열%한접속도
SHS welding electrode%Welding process%Density%Preheating%Welding speed
研究了焊药密实度、焊前预热、焊接速度、试板厚度和后热等对自蔓延焊条的焊接工艺性影响规律.结果发现,当药粉密度在2.60~2.80 g/cm3时,自蔓延焊条燃烧速度为10.5 mm/s,焊接可控性好.焊前350℃预热可以增加焊接熔深,实现单面焊双面成形效果.焊接速度取决于试板厚度,提高焊接速度明显降低较厚试板的焊透性和焊接效果.后热对自蔓延焊条工艺性能没有显著影响.
研究瞭銲藥密實度、銲前預熱、銲接速度、試闆厚度和後熱等對自蔓延銲條的銲接工藝性影響規律.結果髮現,噹藥粉密度在2.60~2.80 g/cm3時,自蔓延銲條燃燒速度為10.5 mm/s,銲接可控性好.銲前350℃預熱可以增加銲接鎔深,實現單麵銲雙麵成形效果.銲接速度取決于試闆厚度,提高銲接速度明顯降低較厚試闆的銲透性和銲接效果.後熱對自蔓延銲條工藝性能沒有顯著影響.
연구료한약밀실도、한전예열、한접속도、시판후도화후열등대자만연한조적한접공예성영향규률.결과발현,당약분밀도재2.60~2.80 g/cm3시,자만연한조연소속도위10.5 mm/s,한접가공성호.한전350℃예열가이증가한접용심,실현단면한쌍면성형효과.한접속도취결우시판후도,제고한접속도명현강저교후시판적한투성화한접효과.후열대자만연한조공예성능몰유현저영향.