冶金设备
冶金設備
야금설비
METALLURGICAL EQUIPMENT
2013年
6期
29-33,41
,共6页
彭艳%张明%孙建亮%丛阳阳%邢建康%高伟
彭豔%張明%孫建亮%叢暘暘%邢建康%高偉
팽염%장명%손건량%총양양%형건강%고위
热连轧机%受迫振动%接轴弧形齿%水平共振%振纹
熱連軋機%受迫振動%接軸弧形齒%水平共振%振紋
열련알궤%수박진동%접축호형치%수평공진%진문
Continuous hot strip mill%Forced vibration%Spindle curved tooth%Horizontal resonance vi-bration%Chatter mark
针对迁钢2160热轧生产线F2轧机在轧制薄规格产品时频繁出现异常振动以及分速箱齿面剥落现象,组织了对轧机机座和分速箱的综合测试。分析表明:轧机机座振动和分速箱振动为受迫振动,其振动频率与弧形齿啮合频率相吻合。接轴弧形齿啮合间隙过大是造成轧机振动的直接原因。提出了调整或更换接轴弧形齿抑振措施。更换接轴后,异常振动明显减弱甚至消失,效果令人满意。
針對遷鋼2160熱軋生產線F2軋機在軋製薄規格產品時頻繁齣現異常振動以及分速箱齒麵剝落現象,組織瞭對軋機機座和分速箱的綜閤測試。分析錶明:軋機機座振動和分速箱振動為受迫振動,其振動頻率與弧形齒齧閤頻率相吻閤。接軸弧形齒齧閤間隙過大是造成軋機振動的直接原因。提齣瞭調整或更換接軸弧形齒抑振措施。更換接軸後,異常振動明顯減弱甚至消失,效果令人滿意。
침대천강2160열알생산선F2알궤재알제박규격산품시빈번출현이상진동이급분속상치면박락현상,조직료대알궤궤좌화분속상적종합측시。분석표명:알궤궤좌진동화분속상진동위수박진동,기진동빈솔여호형치교합빈솔상문합。접축호형치교합간극과대시조성알궤진동적직접원인。제출료조정혹경환접축호형치억진조시。경환접축후,이상진동명현감약심지소실,효과령인만의。
For the abnormal vibration phenomena frequently occurring in the rolling of thin gauge products on Finisher 2(F2) of 2160 continuous hot strip mill of Qiangang and the phenomena of the gearbox surface spalling , a comprehensive test about the mill and gearbox was done .The results show that the stand vibration and gear vibra-tion are forced vibration , and the vibration frequency is coincided with the frequency of spindle curved tooth mes -hing.The too large gap of the spindle curved tooth mesh is the direct cause of the mill vibration .So, to suppress the vibration, a program of adjusting or replacing the spindle curved tooth has been suggested .After replacing the spin-dles, the abnormal vibration is significantly reduced or even disappeared .The results are satisfying.