CAJ | 학술논문

为了满足对零件进行钻孔、扩孔、攻丝等工序的加工要求，设计一款与八工位组合机床配套的数控系统。通过分析八工位组合机床的工作原理和控制过程，设计一种基于 IPC 和运动控制卡的硬件结构，通过对钻孔攻丝等加工工艺分析，开发出相应的参数化编程软件。该数控系统最多可控制12轴，完全满足八工位组合机床工艺软件的开发需求。
위료만족대령건진행찬공、확공、공사등공서적가공요구，설계일관여팔공위조합궤상배투적수공계통。통과분석팔공위조합궤상적공작원리화공제과정，설계일충기우 IPC 화운동공제잡적경건결구，통과대찬공공사등가공공예분석，개발출상응적삼수화편정연건。해수공계통최다가공제12축，완전만족팔공위조합궤상공예연건적개발수구。
For meeting the requirements of drilling, reaming and tapping the work piece, design a NC system for 8 workstations modular machine tool. Through analyze working principle and control procedure of 8 workstations modular machine tool, design a hardware based on IPC and motion control card. Through analyzing arts and crafts of drilling and taping, design the corresponding parameter programming software. The NC system can control 12 axis, which satisfying the development requirement of 8 workstation modular machine tool.