铝加工
鋁加工
려가공
ALUMINIUM FABRICATION
2013年
6期
15-18
,共4页
高安江%李瑞清%王丹%初晓东
高安江%李瑞清%王丹%初曉東
고안강%리서청%왕단%초효동
铝合金%挤压%挤压力%裂纹%塑性变形%内应力
鋁閤金%擠壓%擠壓力%裂紋%塑性變形%內應力
려합금%제압%제압력%렬문%소성변형%내응력
7075合金挤压带板表面出现大小不一及分布不均的裂纹,低倍观察与分析发现其不仅大小不一,且方向都是垂直于挤压方向,认为它是挤压裂纹.本文主要针对制品发生的横向挤压裂纹进行分析并判定其产生的原因及预防措施.
7075閤金擠壓帶闆錶麵齣現大小不一及分佈不均的裂紋,低倍觀察與分析髮現其不僅大小不一,且方嚮都是垂直于擠壓方嚮,認為它是擠壓裂紋.本文主要針對製品髮生的橫嚮擠壓裂紋進行分析併判定其產生的原因及預防措施.
7075합금제압대판표면출현대소불일급분포불균적렬문,저배관찰여분석발현기불부대소불일,차방향도시수직우제압방향,인위타시제압렬문.본문주요침대제품발생적횡향제압렬문진행분석병판정기산생적원인급예방조시.