CAJ | 학술논문

研究磨削液中主要成分乳化剂的组成及用量,考察防锈剂种类及其用量对磨削液防锈性能的影响,确定乳化剂和防锈剂的配方组成,制备一种新型微乳磨削液,并检测其性能。实验结果显示,非离子表面活性剂复配乳化剂用量为6%,除油率可达95%;防锈剂单乙醇胺用量为8%、三乙醇胺用量为8%、苯并三氮唑用量为0.3%时,防锈性能达到GB6144—85标准。
연구마삭액중주요성분유화제적조성급용량,고찰방수제충류급기용량대마삭액방수성능적영향,학정유화제화방수제적배방조성,제비일충신형미유마삭액,병검측기성능。실험결과현시,비리자표면활성제복배유화제용량위6%,제유솔가체95%;방수제단을순알용량위8%、삼을순알용량위8%、분병삼담서용량위0.3%시,방수성능체도GB6144—85표준。
The composition and content of emulsifier and antirusting agent were investigated in grinding fluid by investigating the influence of kind and amount of surfactants and antirusting agent on the performance of microemulsion grinding fluid.Microemulsion grinding fluid was prepared and measured.The results showed that the oil removal rate is 95% with emulsifier formed from a mixture of four non-ionic surfactant of 6%.And the optimal composition of antirusting agent is as follows：monoethanolamine 8%,triethanolamine 8%,benzotriazole 0.3%.The antirust performance of microemulsion grinding fluid has reached the Chinese National Standard-the Synthesized Cutting Fluid（GB6144—85）.