CAJ | 학술논문

__摘_大兴安岭岔路口钼铅锌多金属矿胶带斜井施工中，经过详细技术论证和经济比较，采用以带式输送机为主，配套侧卸式铲运机和履带式挖掘装岩机，组成铲、装、运机械化废石输送系统，将斜井掘进工作面废石运输到地面，节省了掘进出渣时间，加快了施工进度，降低了施工成本，取得了较好的技术经济效益。该井筒两掘一支正规循环作业时，平均月进尺达到160m，最高月进尺超过了200m。
__적_대흥안령차로구목연자다금속광효대사정시공중，경과상세기술론증화경제비교，채용이대식수송궤위주，배투측사식산운궤화리대식알굴장암궤，조성산、장、운궤계화폐석수송계통，장사정굴진공작면폐석운수도지면，절성료굴진출사시간，가쾌료시공진도，강저료시공성본，취득료교호적기술경제효익。해정통량굴일지정규순배작업시，평균월진척체도160m，최고월진척초과료200m。
In a construction of a mine inclined belt conveyor shaft in Daxing ’anling Chalukou Molybde-num ,Lead and Zinc Polymetallic Mine ,with a detail technical demonstration and economic compari-son ,a shoveling ,loading and transportation mechanized waste rock transportation system was com-posed with a belt conveyor as a main equipment and a load-haul-side dumper and crawler type backhoe-loader as a secondary equipment. Waste rocks from the heading face in the mine inclined shaft would be conveyed to the mine surface ground ,thus a heading and waste rock discharging time saved ,con-struction speed of the mine inclined shaft speeded up ,construction cost reduced and good technical and economic benefits obtained. With a two heading and one support normal cycle operation of the mine in-clined shaft construction ,an average month advancing rate reached at 160m and a max month advan-cing rate w as over 200m.