CAJ | 학술논문

将硫化烯烃添加到苯基硅油中，采用四球试验机考察了硫化烯烃对苯基硅油摩擦学性能的影响。结果表明，添加硫化烯烃可降低苯基硅油的磨斑直径和摩擦系数；当苯基硅油中国产硫化烯烃或进口硫化烯烃的质量分数为5％时，其烧结负荷较纯苯基硅油分别提高了118.75％和181.25％，且后者比前者高28.57％；但两种硫化烯烃都不能改善苯基硅油的油膜强度。
장류화희경첨가도분기규유중，채용사구시험궤고찰료류화희경대분기규유마찰학성능적영향。결과표명，첨가류화희경가강저분기규유적마반직경화마찰계수；당분기규유중국산류화희경혹진구류화희경적질량분수위5％시，기소결부하교순분기규유분별제고료118.75％화181.25％，차후자비전자고28.57％；단량충류화희경도불능개선분기규유적유막강도。
A sulfurized olefin was added into the phenyl silicone oil,the effects of the sulfurized olefin on the tribological properties of phenyl silicone oil by four-ball tester were investigated. Results show that the sul-furized olefin can reduce the wear scar diameter and friction coefficient of phenyl silicone oil. Especially when 5% of the domestic or imported sulfurized olefin is added in phenyl silicone oil,the sintering loads (PD ) (compared with pure phenyl silicone oil)is increased by 118. 75% and 181. 25%,and the latter is 28. 57%higher than the former. However,neither of them can improve the oil film strength (PB )of phenyl silicone oil.