红外与激光工程
紅外與激光工程
홍외여격광공정
INFRARED AND LASER ENGINEERING
2014年
5期
1428-1432
,共5页
张世强%蔡雷%张政%卢慧玲%周松青%瞿谱波
張世彊%蔡雷%張政%盧慧玲%週鬆青%瞿譜波
장세강%채뢰%장정%로혜령%주송청%구보파
超连续谱%光束质量%评价方法
超連續譜%光束質量%評價方法
초련속보%광속질량%평개방법
supercontinuum%beam quality%method of evaluation
作为一种新型激光光源,超连续谱光源由于具有白炽灯的光谱宽度和激光的亮度,成为目前研究的一个热点,但其光束质量的评价方法至今研究报道的较少,给应用带来了不便。分析比较了各种常用光束质量评价方法的优缺点,提出用测量典型波长光束质量,结合光谱特性及光束同轴性分析评价超连续谱光源光束质量的方法,并用此方法对一台超连续谱光源的光束质量进行了测量。结果表明,超连续谱光源的光束质量与泵浦光的功率密切相关,功率较小时M2因子在1.5以下,功率较大时M2维持在1.9左右。另外,可见光部分光束质量M2因子在1.5左右,且随着泵浦功率的提高,光束质量越变越好,维持在1.3左右。
作為一種新型激光光源,超連續譜光源由于具有白熾燈的光譜寬度和激光的亮度,成為目前研究的一箇熱點,但其光束質量的評價方法至今研究報道的較少,給應用帶來瞭不便。分析比較瞭各種常用光束質量評價方法的優缺點,提齣用測量典型波長光束質量,結閤光譜特性及光束同軸性分析評價超連續譜光源光束質量的方法,併用此方法對一檯超連續譜光源的光束質量進行瞭測量。結果錶明,超連續譜光源的光束質量與泵浦光的功率密切相關,功率較小時M2因子在1.5以下,功率較大時M2維持在1.9左右。另外,可見光部分光束質量M2因子在1.5左右,且隨著泵浦功率的提高,光束質量越變越好,維持在1.3左右。
작위일충신형격광광원,초련속보광원유우구유백치등적광보관도화격광적량도,성위목전연구적일개열점,단기광속질량적평개방법지금연구보도적교소,급응용대래료불편。분석비교료각충상용광속질량평개방법적우결점,제출용측량전형파장광속질량,결합광보특성급광속동축성분석평개초련속보광원광속질량적방법,병용차방법대일태초련속보광원적광속질량진행료측량。결과표명,초련속보광원적광속질량여빙포광적공솔밀절상관,공솔교소시M2인자재1.5이하,공솔교대시M2유지재1.9좌우。령외,가견광부분광속질량M2인자재1.5좌우,차수착빙포공솔적제고,광속질량월변월호,유지재1.3좌우。
As a new type of laser source, supercontinuum has become a hot study, owing to its incandescent wide spectra and the brightness of the laser, but the reports of the beam quality are few recently. It inconveniences the application of SC. The method of measuring the beam quality of supercontinuum was put forward by analyzing and comparing the beam quality evaluation methods. The beam quality of a supercontinuum source was measured. The results shows that the beam quality of the supercontinuum source is closely related to the pump power density. The beam quality M2 factor is less than 1.5, when the pump power is small. The beam quality M2 factor is around 1.9, when the pump power is larger. In addition, the beam quality M2 factor of visible part is less than 1.5, and with the increase of the pump power, the beam quality of supercontinuum is getting better, the beam quality M2 factor is maintained at about 1.3.