机械制造与自动化
機械製造與自動化
궤계제조여자동화
JIANGSU MACHINE BUILDING & AUTOMATION
2014年
1期
60-62,72
,共4页
钢板轧制厚度控制%影响因素%电液位置控制建模%压下控制
鋼闆軋製厚度控製%影響因素%電液位置控製建模%壓下控製
강판알제후도공제%영향인소%전액위치공제건모%압하공제
steel plate rolling thickness control%influence factors%modeling of electro-hydraulic position control%gauge control
钢板轧制厚度控制技术是钢板轧制过程中最重要、最基础的控制技术.以辽宁汇通企业集团公司1050四辊可逆式轧机改造为研究内容,对轧机的自动厚度控制系统设计理论进行了研究,结合轧机的弹跳方程曲线及钢板变形塑性曲线,分析了各种干扰因素对轧机钢板出口厚度的影响,建立了电液位置控制系统理论模型,研究了位置压下控制中的AGC问题,实现自动位置控制和轧机的顺序控制.通过实测轧制数据可知,轧制钢板实际厚度与钢板设定厚度的最大差值为0.054 mm,中心部位与边缘部位最大厚度差不超过0.039 mm,钢板厚度控制系统控制精度达到控制要求指标.
鋼闆軋製厚度控製技術是鋼闆軋製過程中最重要、最基礎的控製技術.以遼寧彙通企業集糰公司1050四輥可逆式軋機改造為研究內容,對軋機的自動厚度控製繫統設計理論進行瞭研究,結閤軋機的彈跳方程麯線及鋼闆變形塑性麯線,分析瞭各種榦擾因素對軋機鋼闆齣口厚度的影響,建立瞭電液位置控製繫統理論模型,研究瞭位置壓下控製中的AGC問題,實現自動位置控製和軋機的順序控製.通過實測軋製數據可知,軋製鋼闆實際厚度與鋼闆設定厚度的最大差值為0.054 mm,中心部位與邊緣部位最大厚度差不超過0.039 mm,鋼闆厚度控製繫統控製精度達到控製要求指標.
강판알제후도공제기술시강판알제과정중최중요、최기출적공제기술.이료녕회통기업집단공사1050사곤가역식알궤개조위연구내용,대알궤적자동후도공제계통설계이론진행료연구,결합알궤적탄도방정곡선급강판변형소성곡선,분석료각충간우인소대알궤강판출구후도적영향,건립료전액위치공제계통이론모형,연구료위치압하공제중적AGC문제,실현자동위치공제화알궤적순서공제.통과실측알제수거가지,알제강판실제후도여강판설정후도적최대차치위0.054 mm,중심부위여변연부위최대후도차불초과0.039 mm,강판후도공제계통공제정도체도공제요구지표.