北京科技大学学报
北京科技大學學報
북경과기대학학보
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING
2014年
2期
246-251
,共6页
朱小星%王宝雨%杨乐毅%左斌%李智
硃小星%王寶雨%楊樂毅%左斌%李智
주소성%왕보우%양악의%좌빈%리지
齿轮%滚轧%剪切摩擦%金属流动
齒輪%滾軋%剪切摩抆%金屬流動
치륜%곤알%전절마찰%금속류동
gears%roll forming%shear friction%metal flow
基于范成挤压原理,采用梯形面积近似代替轧件长高齿形面积,对齿廓间的相对滑动进行了理论求解分析;从齿廓的相对滑动状况分析了其对轧件齿廓所受剪切摩擦方向的影响。通过仿真和实验相结合的方法验证了齿廓间相对滑动对齿廓金属流动方向的影响,证实了齿廓金属拉起和所受摩擦方向的一致性。
基于範成擠壓原理,採用梯形麵積近似代替軋件長高齒形麵積,對齒廓間的相對滑動進行瞭理論求解分析;從齒廓的相對滑動狀況分析瞭其對軋件齒廓所受剪切摩抆方嚮的影響。通過倣真和實驗相結閤的方法驗證瞭齒廓間相對滑動對齒廓金屬流動方嚮的影響,證實瞭齒廓金屬拉起和所受摩抆方嚮的一緻性。
기우범성제압원리,채용제형면적근사대체알건장고치형면적,대치곽간적상대활동진행료이론구해분석;종치곽적상대활동상황분석료기대알건치곽소수전절마찰방향적영향。통과방진화실험상결합적방법험증료치곽간상대활동대치곽금속류동방향적영향,증실료치곽금속랍기화소수마찰방향적일치성。
Based on the generating and extrusion theory, relative sliding between tooth profiles during gear roll forming process was solved by using the trapezoid area approximately instead of the rolled gear tooth grown area. The shear friction direction on the tooth profiles was analyzed from the relative sliding state. The influence of the relative sliding on the metal flow direction on gear profiles was verified through numerical simulation and experiment. It is verified that metal pulling on the rolling profiles is consistent with the shear friction direction.