CAJ | 학술논문

针对目前很多控制器在处理速度、电路板抗干扰、采样数据精度等方面存在一些问题，根据项目开发经验，从处理器选型、电路板优化、数据采样、按键中断设计、液晶显示、晶闸管触发驱动等方面对磁控电抗器控制系统的设计进行优化，提出提高其可靠性的实用措施，并对这些措施的可靠性进行仿真验证。结果表明，优化后的磁控电抗器线电压采样波形完整，噪声大大减小，过零信号精确，对应的触发角精度也得到较大的提高。
침대목전흔다공제기재처리속도、전로판항간우、채양수거정도등방면존재일사문제，근거항목개발경험，종처리기선형、전로판우화、수거채양、안건중단설계、액정현시、정갑관촉발구동등방면대자공전항기공제계통적설계진행우화，제출제고기가고성적실용조시，병대저사조시적가고성진행방진험증。결과표명，우화후적자공전항기선전압채양파형완정，조성대대감소，과령신호정학，대응적촉발각정도야득도교대적제고。
Aiming at problems of several processors including processing speed,anti-interference of circuit board and preci-sion of sample data,this paper discusses optimization for design of magnetic controllable reactor control system in aspects of selection for the processor,optimization of circuit board,data sampling,break-off design for the key,liquid-crystal display and trigger drive of the thyristor according to project development experiences.It proposes practical measures to improve re-liability and proceeds simulation verification for these measures.The result indicates that sampling waveform of the line volt-age of optimized magnetic controllable reactor is complete,noise is greatly reduced,zero passage signal is precise and preci-sion of corresponding trigger angle is improved.