当代化工
噹代化工
당대화공
CONTEMPORARY CHEMICAL INDUSTRY
2014年
1期
32-35
,共4页
杨保平%席满意%崔锦峰%郭军红%崔卓
楊保平%席滿意%崔錦峰%郭軍紅%崔卓
양보평%석만의%최금봉%곽군홍%최탁
聚脲%相变微胶囊%调温%涂料
聚脲%相變微膠囊%調溫%塗料
취뇨%상변미효낭%조온%도료
Poly-urea%Phase change microcapsule%Temperature adjustment%Coating
实验采用界面聚合法,以2,4-甲苯二异氰酸酯(TDI)与四乙烯五胺(TEPA)的反应物为壁材包覆硬脂酸丁酯制成聚脲微胶囊相变材料,同时对微胶囊进行了FTIR、DSC和SEM等性能检测。并将此自制微胶囊作为填料,添加到防锈涂料中,对其进行相应的性能检测及表征,结果表明:防锈涂料相变温度19.2℃,相变焓65.5 J/g,具有一定的调温性能。
實驗採用界麵聚閤法,以2,4-甲苯二異氰痠酯(TDI)與四乙烯五胺(TEPA)的反應物為壁材包覆硬脂痠丁酯製成聚脲微膠囊相變材料,同時對微膠囊進行瞭FTIR、DSC和SEM等性能檢測。併將此自製微膠囊作為填料,添加到防鏽塗料中,對其進行相應的性能檢測及錶徵,結果錶明:防鏽塗料相變溫度19.2℃,相變焓65.5 J/g,具有一定的調溫性能。
실험채용계면취합법,이2,4-갑분이이청산지(TDI)여사을희오알(TEPA)적반응물위벽재포복경지산정지제성취뇨미효낭상변재료,동시대미효낭진행료FTIR、DSC화SEM등성능검측。병장차자제미효낭작위전료,첨가도방수도료중,대기진행상응적성능검측급표정,결과표명:방수도료상변온도19.2℃,상변함65.5 J/g,구유일정적조온성능。
Poly-urea microcapsules phase change materials were prepared by the interfacial polymerization using the reaction product of 2, 4-toluenediisocyanate (TDI) and tetraethylenepentamine (TEPA) as wall material. The prepared phase change materials were characterized by Fourier transmission infrared spectra (FT-IR), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Meanwhile, the phase change materials were used into the antirust paint as thermal insulation filler;properties of the antirust paint were studied and characterized. The results show that the phase change temperature of anticorrosive coating is 19.2 ℃, and the phase change enthalpy is 65.5 J/g. Therefore, the antirust paint with poly-urea microcapsules phase change materials as thermal insulation filler has a certain temperature adjusting performance.