功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2014年
5期
5092-5096
,共5页
李松波%赵文玉%杨燕茹%安胜利
李鬆波%趙文玉%楊燕茹%安勝利
리송파%조문옥%양연여%안성리
阳极材料%溶胶-凝胶法%电导率
暘極材料%溶膠-凝膠法%電導率
양겁재료%용효-응효법%전도솔
anode materials%sol-gel%conductivity
为寻求能与中温电解质相匹配的阳极材料,采用EDTA溶胶-凝胶法制备了Cux Co1-x O和SDC粉体,并用压制法制备了 Cux Co1-x O-SDC素胚.利用 X射线衍射技术对粉体的性能进行了表征,XRD结果表明,CuO、Co2 O3已生成了互溶新物质 Cux Co1-x O;Cux Co1-x O 与SDC在烧结的过程中没有发生相互反应,各自成单相结构.采用直流四电极法测试了Cux Co1-x O 的电导率,结果表明其在中温条件下也具有较高电导率,其中Cu0.9 Co0.1 O-SDC阳极样品具有最高的电导率,还原后在500℃时电导率达到了1310.1 S/cm.
為尋求能與中溫電解質相匹配的暘極材料,採用EDTA溶膠-凝膠法製備瞭Cux Co1-x O和SDC粉體,併用壓製法製備瞭 Cux Co1-x O-SDC素胚.利用 X射線衍射技術對粉體的性能進行瞭錶徵,XRD結果錶明,CuO、Co2 O3已生成瞭互溶新物質 Cux Co1-x O;Cux Co1-x O 與SDC在燒結的過程中沒有髮生相互反應,各自成單相結構.採用直流四電極法測試瞭Cux Co1-x O 的電導率,結果錶明其在中溫條件下也具有較高電導率,其中Cu0.9 Co0.1 O-SDC暘極樣品具有最高的電導率,還原後在500℃時電導率達到瞭1310.1 S/cm.
위심구능여중온전해질상필배적양겁재료,채용EDTA용효-응효법제비료Cux Co1-x O화SDC분체,병용압제법제비료 Cux Co1-x O-SDC소배.이용 X사선연사기술대분체적성능진행료표정,XRD결과표명,CuO、Co2 O3이생성료호용신물질 Cux Co1-x O;Cux Co1-x O 여SDC재소결적과정중몰유발생상호반응,각자성단상결구.채용직류사전겁법측시료Cux Co1-x O 적전도솔,결과표명기재중온조건하야구유교고전도솔,기중Cu0.9 Co0.1 O-SDC양겁양품구유최고적전도솔,환원후재500℃시전도솔체도료1310.1 S/cm.
In order to seek anode materials matching with intermediate temperature electrolyte,Cux Co1-x O and SDC powders were prepared by EDTA sol-gel method,and the Cux Co1-x O-SDC bisques were prepared by press forming.The powders were characterized by XRD.The results show that CuO and Co2 O3 have formed new intersoluble material Cux Co1-x O;Cux Co1-x O and SDC do not react each other and keep single phase respective-ly.The conductivities of Cux Co1-x O are tested by direct current four-probe method.The results show that con-ductivity remains high at mid-temperature,and the Cu0.9 Co0.1 O-SDC after reduction has the highest conductivity of 1 310.1 S/cm at 500 ℃.