功能材料
功能材料
공능재료
JOURNAL OF FUNCTIONAL MATERIALS
2014年
5期
5045-5048
,共4页
盖永乾%丁伟中%金容%孟星宇%吉福堂%王贺
蓋永乾%丁偉中%金容%孟星宇%吉福堂%王賀
개영건%정위중%금용%맹성우%길복당%왕하
透氧膜%Ba1-xLaxCo0.9Nb0. 1O3-δ%稳定性%相分解%透氧能力
透氧膜%Ba1-xLaxCo0.9Nb0. 1O3-δ%穩定性%相分解%透氧能力
투양막%Ba1-xLaxCo0.9Nb0. 1O3-δ%은정성%상분해%투양능력
oxygen permeation membrane%Ba1-x Lax Co0.9 Nb0.1 O3-δ%structural stability%phase decomposition%ox-ygen permeability
利用固相合成法制备了Ba1-x Lax Co0.9 Nb0.1 O3-δ(x=0~0.3)透氧膜材料.研究发现,La 的掺杂虽然降低了材料的透氧率,但使得相结构更加稳定.分析结果表明,BaCo0.9 Nb0.1 O3-δ在较低工作温度下透氧率的衰减是由相分解所致. La 的掺杂能够减小容差因子,有利于立方相的形成和稳定,并有效改善透氧率衰减问题.Ba0.9 La0.1 Co0.9 Nb0.1 O3-δ在850℃、Air/He条件下表现出稳定的高透氧率,达到1.75 mL/(cm2?min).
利用固相閤成法製備瞭Ba1-x Lax Co0.9 Nb0.1 O3-δ(x=0~0.3)透氧膜材料.研究髮現,La 的摻雜雖然降低瞭材料的透氧率,但使得相結構更加穩定.分析結果錶明,BaCo0.9 Nb0.1 O3-δ在較低工作溫度下透氧率的衰減是由相分解所緻. La 的摻雜能夠減小容差因子,有利于立方相的形成和穩定,併有效改善透氧率衰減問題.Ba0.9 La0.1 Co0.9 Nb0.1 O3-δ在850℃、Air/He條件下錶現齣穩定的高透氧率,達到1.75 mL/(cm2?min).
이용고상합성법제비료Ba1-x Lax Co0.9 Nb0.1 O3-δ(x=0~0.3)투양막재료.연구발현,La 적참잡수연강저료재료적투양솔,단사득상결구경가은정.분석결과표명,BaCo0.9 Nb0.1 O3-δ재교저공작온도하투양솔적쇠감시유상분해소치. La 적참잡능구감소용차인자,유리우립방상적형성화은정,병유효개선투양솔쇠감문제.Ba0.9 La0.1 Co0.9 Nb0.1 O3-δ재850℃、Air/He조건하표현출은정적고투양솔,체도1.75 mL/(cm2?min).
Ba1-xLaxCo0.9Nb0.1O3-δ(x=0-0.3)membranes were synthesized through conventional solid-phase re-action.Although the raise of La doping level sacrifices the oxygen permeability,the phase stability of cubic per-ovskite structure was effectively improved.The material characterizations indicate that the degradation behavior of BaCo0.9 Nb0.1 O3-δwas attributed to the phase decomposition of cubic structure.The introduction of La decrea-ses the tolerance factors and successfully solves the problem of oxygen flux degradation.Impressively high and long-term stable oxygen flux as high as 1.75 mL/(cm2?min)was obtained through 1 mm Ba0.9 La0.1 Co0.9 Nb0.1 O3-δmembrane at 850 ℃ under air/He gradient.