中国煤炭
中國煤炭
중국매탄
CHINA COAL
2014年
1期
37-41,97
,共6页
地面电测深法%视电阻率%工作面富水性
地麵電測深法%視電阻率%工作麵富水性
지면전측심법%시전조솔%공작면부수성
ground electric sounding method%apparent resistivity%water abundance in min-ing face
为查明河北康城煤矿1905工作面顶底板、底板 H1火成岩及工作面范围内富导水性,根据现场地形地物条件,选择电测深对称四极装置沿工作面走向平行布设4条测线。经反演分析后,绘制出相应测线的视电阻率等值线图。依据9#煤层底板标高线,绘制出9#煤层顶、底板及 H1火成岩层视电阻率顺层切片三维图。综合分析表明,测区内富水异常分布不均一,西南部及东北部富水性相对较强,局部富水异常较明显,且在垂向上有较强的水力联系。在工作面布设前布置了钻孔进行验证。建议在工作面掘进过程中,针对圈定的低阻异常区段,开展超前探查和防治措施,以确保工作面安全掘进和回采。
為查明河北康城煤礦1905工作麵頂底闆、底闆 H1火成巖及工作麵範圍內富導水性,根據現場地形地物條件,選擇電測深對稱四極裝置沿工作麵走嚮平行佈設4條測線。經反縯分析後,繪製齣相應測線的視電阻率等值線圖。依據9#煤層底闆標高線,繪製齣9#煤層頂、底闆及 H1火成巖層視電阻率順層切片三維圖。綜閤分析錶明,測區內富水異常分佈不均一,西南部及東北部富水性相對較彊,跼部富水異常較明顯,且在垂嚮上有較彊的水力聯繫。在工作麵佈設前佈置瞭鑽孔進行驗證。建議在工作麵掘進過程中,針對圈定的低阻異常區段,開展超前探查和防治措施,以確保工作麵安全掘進和迴採。
위사명하북강성매광1905공작면정저판、저판 H1화성암급공작면범위내부도수성,근거현장지형지물조건,선택전측심대칭사겁장치연공작면주향평행포설4조측선。경반연분석후,회제출상응측선적시전조솔등치선도。의거9#매층저판표고선,회제출9#매층정、저판급 H1화성암층시전조솔순층절편삼유도。종합분석표명,측구내부수이상분포불균일,서남부급동북부부수성상대교강,국부부수이상교명현,차재수향상유교강적수력련계。재공작면포설전포치료찬공진행험증。건의재공작면굴진과정중,침대권정적저조이상구단,개전초전탐사화방치조시,이학보공작면안전굴진화회채。
In order to find out the water abundance and hydraulic conductivity in the roof&floor, floor H1 igneous rocks and working range in 1905 mining face in Kangcheng coal mine,according to the terrain and surface features,the symmetric electric quadrupole sounding device is used,and 4 parallel survey lines are arranged along the trend of the mining face.After inverse analysis,4 apparent resistivity isoline charts are drawn.Based on the floor elevation lines of 9# coal floor,the 3D figure of the apparent resistivity bedding layer slice of 9# coal roof,floor and H1 igneous rock are drawn.Comprehensive anal-ysis shows that the water-abundance anomaly distributes unevenly,and more water-abundance zones lo-cate in the southwest and the northeast part,and local water-abundance anomaly is obvious with strong waters connection in vertical.Therefore,before setting the working face,drillings should be arranged to verify the fact,or during the working face tunneling,the advanced detection and prevention should be a-dopted in the circled abnormal low resistance zones,to ensure the safety of the working face tunneling and mining.