合成橡胶工业
閤成橡膠工業
합성상효공업
CHINA SYNTHETIC RUBBER INDUSTRY
2014年
2期
116-120
,共5页
集成橡胶%天然橡胶%并用%相态结构%力学性能%动态力学性能%耐切割性能%耐磨性能
集成橡膠%天然橡膠%併用%相態結構%力學性能%動態力學性能%耐切割性能%耐磨性能
집성상효%천연상효%병용%상태결구%역학성능%동태역학성능%내절할성능%내마성능
integrated rubber%natural rubber%blend%micromorphology%mechanical property%dynamical mechanical property%cutting resistance%wear resistance
研究了天然橡胶/集成橡胶(NR/SIBR)的并用比(质量比)对胶料的相态结构、力学性能、动态力学性能、耐切割性能、耐磨性能和压缩疲劳生热的影响.结果表明,NR/SIBR并用比为20/80时,并用胶的相态结构均匀;并用比为30/70和40/60时,并用胶呈现明显的相分离结构;NR/SIBR并用比为40/60时,表现出2个玻璃化转变温度.与纯SIBR相比,NR/SIBR并用胶的动态损耗峰变宽,拉伸强度和撕裂强度变化不大,但耐切割性能、耐磨性能有所降低,压缩疲劳生热有所增加.
研究瞭天然橡膠/集成橡膠(NR/SIBR)的併用比(質量比)對膠料的相態結構、力學性能、動態力學性能、耐切割性能、耐磨性能和壓縮疲勞生熱的影響.結果錶明,NR/SIBR併用比為20/80時,併用膠的相態結構均勻;併用比為30/70和40/60時,併用膠呈現明顯的相分離結構;NR/SIBR併用比為40/60時,錶現齣2箇玻璃化轉變溫度.與純SIBR相比,NR/SIBR併用膠的動態損耗峰變寬,拉伸彊度和撕裂彊度變化不大,但耐切割性能、耐磨性能有所降低,壓縮疲勞生熱有所增加.
연구료천연상효/집성상효(NR/SIBR)적병용비(질량비)대효료적상태결구、역학성능、동태역학성능、내절할성능、내마성능화압축피로생열적영향.결과표명,NR/SIBR병용비위20/80시,병용효적상태결구균균;병용비위30/70화40/60시,병용효정현명현적상분리결구;NR/SIBR병용비위40/60시,표현출2개파리화전변온도.여순SIBR상비,NR/SIBR병용효적동태손모봉변관,랍신강도화시렬강도변화불대,단내절할성능、내마성능유소강저,압축피로생열유소증가.