石油钻采工艺
石油鑽採工藝
석유찬채공예
OIL DRILLING & PRODUCTION TECHNOLOGY
2014年
1期
37-39,43
,共4页
李俊%赵荣军%孟庆荣%王薇%王一婷%陈德浩
李俊%趙榮軍%孟慶榮%王薇%王一婷%陳德浩
리준%조영군%맹경영%왕미%왕일정%진덕호
连续循环钻井%防喷器组%无侧门螺栓连接%耐磨前密封%现场试验
連續循環鑽井%防噴器組%無側門螺栓連接%耐磨前密封%現場試驗
련속순배찬정%방분기조%무측문라전련접%내마전밀봉%현장시험
Continuous circulation drilling%BOP stack%bolting without the side door%wear-resisting front seal%field test
连续循环钻井技术是近年来出现的一项新技术,该技术能够实现接单根或立柱期间钻井液的连续循环。钻井液的连续循环是通过一组防喷器组成的密闭腔内对不同闸板腔的开启和关闭来实现。通过对连续循环钻井过程中防喷器组工况的分析,结合常规钻井防喷器的特点,确定了该防喷器组的整体结构形式,介绍了防喷器无侧门螺栓连接结构的设计、耐磨前密封的设计、试制和试验、卡瓦闸板的设计、闸板开关状态检测装置的设计情况以及整机样机制造及现场试验情况。现场试验表明,该防喷器组的设计基本达到了预期的目标。最后根据连续循环系统现场试验情况提出了下一步的改进方向。
連續循環鑽井技術是近年來齣現的一項新技術,該技術能夠實現接單根或立柱期間鑽井液的連續循環。鑽井液的連續循環是通過一組防噴器組成的密閉腔內對不同閘闆腔的開啟和關閉來實現。通過對連續循環鑽井過程中防噴器組工況的分析,結閤常規鑽井防噴器的特點,確定瞭該防噴器組的整體結構形式,介紹瞭防噴器無側門螺栓連接結構的設計、耐磨前密封的設計、試製和試驗、卡瓦閘闆的設計、閘闆開關狀態檢測裝置的設計情況以及整機樣機製造及現場試驗情況。現場試驗錶明,該防噴器組的設計基本達到瞭預期的目標。最後根據連續循環繫統現場試驗情況提齣瞭下一步的改進方嚮。
련속순배찬정기술시근년래출현적일항신기술,해기술능구실현접단근혹립주기간찬정액적련속순배。찬정액적련속순배시통과일조방분기조성적밀폐강내대불동갑판강적개계화관폐래실현。통과대련속순배찬정과정중방분기조공황적분석,결합상규찬정방분기적특점,학정료해방분기조적정체결구형식,개소료방분기무측문라전련접결구적설계、내마전밀봉적설계、시제화시험、잡와갑판적설계、갑판개관상태검측장치적설계정황이급정궤양궤제조급현장시험정황。현장시험표명,해방분기조적설계기본체도료예기적목표。최후근거련속순배계통현장시험정황제출료하일보적개진방향。
Continuous circulation drilling technology is a new technique appeared recently and it can realize a continuous circula-tion of drilling lfuid during joint connection and column erection. The continuous circulation of drilling lfuid is accomplished through the opening and closing of different ram cavities in closed cavity made of a group of blowout preventers. The thesis determines the overall structure of blowout preventer and introduces design of bolted structure without the side door; design, trial manufacture and testing of wear-resisting front seal; design of slip ram; design of ram status detector; manufacturing of the whole machine prototype; and situation of ifeld tests. The ifeld tests indicate that the BOP stack can achieve expectant goal basically. In the end, the thesis puts forward the further improvement direction according ifeld test of circulation drilling system.