焊管
銲管
한관
WELDED PIPE AND TUBE
2014年
2期
48-52
,共5页
付现桥%徐敬%卜明哲%刘志田%项祖义%郭旭
付現橋%徐敬%蔔明哲%劉誌田%項祖義%郭旭
부현교%서경%복명철%류지전%항조의%곽욱
不锈钢%复合钢管%堆焊%气体保护焊%硬度
不鏽鋼%複閤鋼管%堆銲%氣體保護銲%硬度
불수강%복합강관%퇴한%기체보호한%경도
stainless steel%clad pipe%overlay welding%gas shielded welding%hardness
介绍了准355.6 mm×(10+3) mm规格L360QS+316L不锈钢复合钢管的新型焊接工艺,即首先采用TIG焊在复合钢管管端进行堆焊预处理,然后再采用氩气保护TIG焊进行对焊操作。为评价环焊缝的性能,焊后对其焊接接头进行了拉伸试验、冲击试验、硬度测试、晶间腐蚀及应力腐蚀试验。试验结果表明,采用该工艺焊接的L360QS+316L不锈钢复合钢管环焊缝焊接接头性能良好,且具备耐晶间腐蚀和应力腐蚀性能;堆焊层起到了很好的隔离作用,保证了焊缝的质量。
介紹瞭準355.6 mm×(10+3) mm規格L360QS+316L不鏽鋼複閤鋼管的新型銲接工藝,即首先採用TIG銲在複閤鋼管管耑進行堆銲預處理,然後再採用氬氣保護TIG銲進行對銲操作。為評價環銲縫的性能,銲後對其銲接接頭進行瞭拉伸試驗、遲擊試驗、硬度測試、晶間腐蝕及應力腐蝕試驗。試驗結果錶明,採用該工藝銲接的L360QS+316L不鏽鋼複閤鋼管環銲縫銲接接頭性能良好,且具備耐晶間腐蝕和應力腐蝕性能;堆銲層起到瞭很好的隔離作用,保證瞭銲縫的質量。
개소료준355.6 mm×(10+3) mm규격L360QS+316L불수강복합강관적신형한접공예,즉수선채용TIG한재복합강관관단진행퇴한예처리,연후재채용아기보호TIG한진행대한조작。위평개배한봉적성능,한후대기한접접두진행료랍신시험、충격시험、경도측시、정간부식급응력부식시험。시험결과표명,채용해공예한접적L360QS+316L불수강복합강관배한봉한접접두성능량호,차구비내정간부식화응력부식성능;퇴한층기도료흔호적격리작용,보증료한봉적질량。
This paper described new welding process on the L360QS/316L clad pipe with size of ?355.6mm ×(10+3) mm. Firstly, it adopted TIG welding to conduct overlaying on the pipe end, and then, using TIG welding process for butt welding with argon gas protection. The tensile strength, charpy impact test, hardness, intergranular corrosion test and SCC were carried out to study the properties of the circumferential weld. The results indicated that the welded joint performance of the circumferential weld is good; it is with resistance to intergranular corrosion and stress corrosion. The overlay welding layer plays a good role in isolation function to ensure the weld quality.