粘接
粘接
점접
2014年
3期
64-67
,共4页
水性聚氨酯(WPU)%防水透湿整理%聚醚多元醇%交联
水性聚氨酯(WPU)%防水透濕整理%聚醚多元醇%交聯
수성취안지(WPU)%방수투습정리%취미다원순%교련
waterborne polyurethane%waterproof and moisture permeating finish%polyether polyol%crosslinking
采用聚醚多元醇、异佛尔酮二异氰酸酯 IPDI 、2,2-二羟甲基丙酸(DMPA)、三乙胺为主要原料,采用自乳化法合成一系列的水性聚氨酯乳液。考查了预聚温度和预聚时间、扩链时间和扩链温度对反应的影响;R值(n-NCO/n-OH)、DMPA的用量和中和度对乳液性能的影响。结果显示,当预聚温度为60℃、预聚时间为60 min、扩链温度为75℃、扩链时间为120 min时,可以保证反应的速率和生产周期;选择R=2、DMPA用量为3%、中和度为100%,可以制得稳定的、性能优异的水性聚氨酯乳液,可用于织物的防水透湿整理。()
採用聚醚多元醇、異彿爾酮二異氰痠酯 IPDI 、2,2-二羥甲基丙痠(DMPA)、三乙胺為主要原料,採用自乳化法閤成一繫列的水性聚氨酯乳液。攷查瞭預聚溫度和預聚時間、擴鏈時間和擴鏈溫度對反應的影響;R值(n-NCO/n-OH)、DMPA的用量和中和度對乳液性能的影響。結果顯示,噹預聚溫度為60℃、預聚時間為60 min、擴鏈溫度為75℃、擴鏈時間為120 min時,可以保證反應的速率和生產週期;選擇R=2、DMPA用量為3%、中和度為100%,可以製得穩定的、性能優異的水性聚氨酯乳液,可用于織物的防水透濕整理。()
채용취미다원순、이불이동이이청산지 IPDI 、2,2-이간갑기병산(DMPA)、삼을알위주요원료,채용자유화법합성일계렬적수성취안지유액。고사료예취온도화예취시간、확련시간화확련온도대반응적영향;R치(n-NCO/n-OH)、DMPA적용량화중화도대유액성능적영향。결과현시,당예취온도위60℃、예취시간위60 min、확련온도위75℃、확련시간위120 min시,가이보증반응적속솔화생산주기;선택R=2、DMPA용량위3%、중화도위100%,가이제득은정적、성능우이적수성취안지유액,가용우직물적방수투습정리。()
Considering the waterproofness and moisture permeability of the fabrics, the polyether polyol, isophorone disocyanate(IPDI), 2,2 dimethylol propionic acid (DMPA)and tri-ethylamine as the main materials were used to synthesis a series of waterborne polyurethane by neutralization emulsification method. In the part of synthesis procss, the temperature and time of pre-polymerization and chain extension reaction were discussed;The influence of R value (NCO/OH mole ratio), DMPA amount and neutralization degree on the emulsion properties was investigated. The results showed that when the prepolymerization time and chain extending time were 60min and 120min respectively, the prepolymerization temperature and chain extending temperature were 55℃ and 75℃ respectively, DMPA=3.0%, R=2, neutralization degree=100%,the stable waterborne polyurethane with excellent performance can be synthesised.