北京科技大学学报
北京科技大學學報
북경과기대학학보
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING
2014年
3期
301-307
,共7页
孙乐飞%王福明%陶素芬%勾雪
孫樂飛%王福明%陶素芬%勾雪
손악비%왕복명%도소분%구설
合金钢%加热%奥氏体%晶粒长大%动力学%氮化铝
閤金鋼%加熱%奧氏體%晶粒長大%動力學%氮化鋁
합금강%가열%오씨체%정립장대%동역학%담화려
alloy steel%heating%austenite%grain growth%kinetics%aluminum nitride
采用金相显微镜和截距法,对不同加热温度和保温时间下机车车轮用钢的奥氏体晶粒长大行为进行研究,分析加热温度和保温时间对奥氏体晶粒尺寸的影响,应用简单动力学模型对奥氏体晶粒的长大过程进行分析,同时研究钢中第二相粒子变化对奥氏体晶粒长大的影响.随着加热温度的升高和保温时间的延长,奥氏体晶粒尺寸明显增加,加热温度对晶粒的长大影响更明显.奥氏体晶粒长大的动力学时间指数随着温度升高而增加且其值均接近理论值0.5;奥氏体晶粒长大和钢中第二相粒子AlN体积分数和尺寸的变化呈明显的相关性.
採用金相顯微鏡和截距法,對不同加熱溫度和保溫時間下機車車輪用鋼的奧氏體晶粒長大行為進行研究,分析加熱溫度和保溫時間對奧氏體晶粒呎吋的影響,應用簡單動力學模型對奧氏體晶粒的長大過程進行分析,同時研究鋼中第二相粒子變化對奧氏體晶粒長大的影響.隨著加熱溫度的升高和保溫時間的延長,奧氏體晶粒呎吋明顯增加,加熱溫度對晶粒的長大影響更明顯.奧氏體晶粒長大的動力學時間指數隨著溫度升高而增加且其值均接近理論值0.5;奧氏體晶粒長大和鋼中第二相粒子AlN體積分數和呎吋的變化呈明顯的相關性.
채용금상현미경화절거법,대불동가열온도화보온시간하궤차차륜용강적오씨체정립장대행위진행연구,분석가열온도화보온시간대오씨체정립척촌적영향,응용간단동역학모형대오씨체정립적장대과정진행분석,동시연구강중제이상입자변화대오씨체정립장대적영향.수착가열온도적승고화보온시간적연장,오씨체정립척촌명현증가,가열온도대정립적장대영향경명현.오씨체정립장대적동역학시간지수수착온도승고이증가차기치균접근이론치0.5;오씨체정립장대화강중제이상입자AlN체적분수화척촌적변화정명현적상관성.
Metallographic microscopy and intercept method were adopted to investigate the austenitic grain growth behavior of loco-motive wheel steel at different heating temperatures and holding time. On the basis of analyzing the effects of heating temperature and holding time on the austenite grain size, a simple kinetic model was used to analyze the austenite grain growth process, and the influ-ence of the evolution of second phase particles on the austenite grain growth was also discussed. It is found that the austenite grain size increases with the rise of heating temperature and the prolonging of holding time, but the influence of heating temperature is more obvi-ous. The kinetic time exponent of austenitic grain growth increases with temperature rise and the value is close to the theoretical value of 1/2. Austenite grain growth and the volume fraction and size variation of second phase particles AlN in the steel have a significant correlation.