合成纤维工业
閤成纖維工業
합성섬유공업
CHINA SYNTHETIC FIBER INDUSTRY
2014年
1期
21-24
,共4页
聚酯%薄膜%钛系催化剂%锑系催化剂
聚酯%薄膜%鈦繫催化劑%銻繫催化劑
취지%박막%태계최화제%제계최화제
polyester%film%titanium catalyst%antimony catalyst
使用自制的钛系催化剂TY-2合成了无重金属膜级聚酯切片,对照乙二醇锑催化剂,考察了催化剂对酯化、缩聚反应过程以及切片性能的影响,探讨了添加剂、稳定剂在合成过程中对催化剂的影响,并且考察了两种切片的热性能、结晶行为、流变性能.结果表明:钛系催化剂TY-2用量为210 ~230μg/g时,得到的无重金属聚酯切片的各项性能合格,色相b值比锑系聚酯仅上升0.5个单位,热性能、结晶行为、流变性能与锑系聚酯差别也不大,可采用锑系聚酯的工艺参数进行拉膜.
使用自製的鈦繫催化劑TY-2閤成瞭無重金屬膜級聚酯切片,對照乙二醇銻催化劑,攷察瞭催化劑對酯化、縮聚反應過程以及切片性能的影響,探討瞭添加劑、穩定劑在閤成過程中對催化劑的影響,併且攷察瞭兩種切片的熱性能、結晶行為、流變性能.結果錶明:鈦繫催化劑TY-2用量為210 ~230μg/g時,得到的無重金屬聚酯切片的各項性能閤格,色相b值比銻繫聚酯僅上升0.5箇單位,熱性能、結晶行為、流變性能與銻繫聚酯差彆也不大,可採用銻繫聚酯的工藝參數進行拉膜.
사용자제적태계최화제TY-2합성료무중금속막급취지절편,대조을이순제최화제,고찰료최화제대지화、축취반응과정이급절편성능적영향,탐토료첨가제、은정제재합성과정중대최화제적영향,병차고찰료량충절편적열성능、결정행위、류변성능.결과표명:태계최화제TY-2용량위210 ~230μg/g시,득도적무중금속취지절편적각항성능합격,색상b치비제계취지부상승0.5개단위,열성능、결정행위、류변성능여제계취지차별야불대,가채용제계취지적공예삼수진행랍막.