机电工程
機電工程
궤전공정
MECHANICAL & ELECTRICAL ENGINEERING MAGAZINE
2014年
3期
404-408
,共5页
韦幸幸%张有兵%谢路耀%杨晓东
韋倖倖%張有兵%謝路耀%楊曉東
위행행%장유병%사로요%양효동
OPNET%微网%业务流%延时
OPNET%微網%業務流%延時
OPNET%미망%업무류%연시
OPNET%microgrid%traffic flow%delay
针对微网通信系统存在的实时性问题,将变电站自动化系统的全球通信标准IEC61850应用到微网通信系统中.建立了基于IEC61850标准的3层微网通信结构,并对微网中的通信业务进行了分析和建模,提出了利用网络仿真软件OPNET对微网通信系统的实时性进行仿真的方法.在OPNET网络仿真平台上,以系统的整体通信延时、保护和控制业务延时和不同节点的延时为研究对象,对采用两种不同链路速率(10 Mbit/s、100 Mbit/s)的微网通信延时进行了试验.研究结果表明,10 Mbit/s的链路带宽基本能满足微网通信系统的整体实时性能要求,但在网络业务流增多时某些业务易出现延时发散,而采用100 Mbit/s的通信链路能较好地全面满足微网通信系统的实时性要求,为微网通信系统带宽的选择以及其他业务的建模提供了一定的参考.
針對微網通信繫統存在的實時性問題,將變電站自動化繫統的全毬通信標準IEC61850應用到微網通信繫統中.建立瞭基于IEC61850標準的3層微網通信結構,併對微網中的通信業務進行瞭分析和建模,提齣瞭利用網絡倣真軟件OPNET對微網通信繫統的實時性進行倣真的方法.在OPNET網絡倣真平檯上,以繫統的整體通信延時、保護和控製業務延時和不同節點的延時為研究對象,對採用兩種不同鏈路速率(10 Mbit/s、100 Mbit/s)的微網通信延時進行瞭試驗.研究結果錶明,10 Mbit/s的鏈路帶寬基本能滿足微網通信繫統的整體實時性能要求,但在網絡業務流增多時某些業務易齣現延時髮散,而採用100 Mbit/s的通信鏈路能較好地全麵滿足微網通信繫統的實時性要求,為微網通信繫統帶寬的選擇以及其他業務的建模提供瞭一定的參攷.
침대미망통신계통존재적실시성문제,장변전참자동화계통적전구통신표준IEC61850응용도미망통신계통중.건립료기우IEC61850표준적3층미망통신결구,병대미망중적통신업무진행료분석화건모,제출료이용망락방진연건OPNET대미망통신계통적실시성진행방진적방법.재OPNET망락방진평태상,이계통적정체통신연시、보호화공제업무연시화불동절점적연시위연구대상,대채용량충불동련로속솔(10 Mbit/s、100 Mbit/s)적미망통신연시진행료시험.연구결과표명,10 Mbit/s적련로대관기본능만족미망통신계통적정체실시성능요구,단재망락업무류증다시모사업무역출현연시발산,이채용100 Mbit/s적통신련로능교호지전면만족미망통신계통적실시성요구,위미망통신계통대관적선택이급기타업무적건모제공료일정적삼고.