涂料工业
塗料工業
도료공업
PAINT & COATINGS INDUSTRY
2014年
7期
13-17
,共5页
超支化聚酯%聚己内酯%涂膜性能
超支化聚酯%聚己內酯%塗膜性能
초지화취지%취기내지%도막성능
hyperbranched polyester%poly-ε-caprolactone%film properties
以三羟甲基丙烷和己内酯为原料,辛酸亚锡为催化剂,经开环聚合得到含柔性长链的液态聚己内酯多元醇(PCLs).再以PCLs为核单体,二羟甲基丙酸为臂,对甲苯磺酸为催化剂,经缩聚反应合成了两代超支化聚酯(HBPEs).采用FT-IR、1H-NMR、GPC对HBPEs进行结构表征,结果表明:HBPE-2的支化度为0.44,相对分子质量与理论相对分子质量比较接近,HBPE-1和HBPE-2的相对分子质量分布系数分别为1.70和1.82,聚酯的代数增加后相对分子质量分布有所变宽.以TDI三聚体为固化剂,对超支化聚酯HBPEs涂膜性能进行测试.结果证明:根据结构设计所合成的超支化聚酯(HBPEs)的涂膜,与同类产物相比,涂膜耐冲击性和柔韧性更佳.其中第2代超支化聚酯的综合性能更优异,耐冲击性50 cm,柔韧性1 mm,铅笔硬度HB.
以三羥甲基丙烷和己內酯為原料,辛痠亞錫為催化劑,經開環聚閤得到含柔性長鏈的液態聚己內酯多元醇(PCLs).再以PCLs為覈單體,二羥甲基丙痠為臂,對甲苯磺痠為催化劑,經縮聚反應閤成瞭兩代超支化聚酯(HBPEs).採用FT-IR、1H-NMR、GPC對HBPEs進行結構錶徵,結果錶明:HBPE-2的支化度為0.44,相對分子質量與理論相對分子質量比較接近,HBPE-1和HBPE-2的相對分子質量分佈繫數分彆為1.70和1.82,聚酯的代數增加後相對分子質量分佈有所變寬.以TDI三聚體為固化劑,對超支化聚酯HBPEs塗膜性能進行測試.結果證明:根據結構設計所閤成的超支化聚酯(HBPEs)的塗膜,與同類產物相比,塗膜耐遲擊性和柔韌性更佳.其中第2代超支化聚酯的綜閤性能更優異,耐遲擊性50 cm,柔韌性1 mm,鉛筆硬度HB.
이삼간갑기병완화기내지위원료,신산아석위최화제,경개배취합득도함유성장련적액태취기내지다원순(PCLs).재이PCLs위핵단체,이간갑기병산위비,대갑분광산위최화제,경축취반응합성료량대초지화취지(HBPEs).채용FT-IR、1H-NMR、GPC대HBPEs진행결구표정,결과표명:HBPE-2적지화도위0.44,상대분자질량여이론상대분자질량비교접근,HBPE-1화HBPE-2적상대분자질량분포계수분별위1.70화1.82,취지적대수증가후상대분자질량분포유소변관.이TDI삼취체위고화제,대초지화취지HBPEs도막성능진행측시.결과증명:근거결구설계소합성적초지화취지(HBPEs)적도막,여동류산물상비,도막내충격성화유인성경가.기중제2대초지화취지적종합성능경우이,내충격성50 cm,유인성1 mm,연필경도HB.