铜业工程
銅業工程
동업공정
COPPER ENGINEERING
2014年
3期
5-7,10
,共4页
C2680%黄铜%带材%弯曲性能%研究
C2680%黃銅%帶材%彎麯性能%研究
C2680%황동%대재%만곡성능%연구
低成本的C2680黄铜带材广泛在接插件中使用,弯曲性能是带材的重要特性之一,可以采用R/t值评判.由于晶粒内滑移以及应力集中,使弯曲表面形成了光滑面、褶皱面和裂纹面.试验表明,轧制工艺及退火工艺对获得弯曲性能优良的带材起着至关重要的作用,留底料的晶粒度影响着带材的弯曲性能,晶粒度在20μm时,弯曲性能不良,晶粒度在10μm时,弯曲性能良好;适当增加退火次数有利于改善带材晶粒的均匀性,提高带材的弯曲性能.
低成本的C2680黃銅帶材廣汎在接插件中使用,彎麯性能是帶材的重要特性之一,可以採用R/t值評判.由于晶粒內滑移以及應力集中,使彎麯錶麵形成瞭光滑麵、褶皺麵和裂紋麵.試驗錶明,軋製工藝及退火工藝對穫得彎麯性能優良的帶材起著至關重要的作用,留底料的晶粒度影響著帶材的彎麯性能,晶粒度在20μm時,彎麯性能不良,晶粒度在10μm時,彎麯性能良好;適噹增加退火次數有利于改善帶材晶粒的均勻性,提高帶材的彎麯性能.
저성본적C2680황동대재엄범재접삽건중사용,만곡성능시대재적중요특성지일,가이채용R/t치평판.유우정립내활이이급응력집중,사만곡표면형성료광활면、습추면화렬문면.시험표명,알제공예급퇴화공예대획득만곡성능우량적대재기착지관중요적작용,류저료적정립도영향착대재적만곡성능,정립도재20μm시,만곡성능불량,정립도재10μm시,만곡성능량호;괄당증가퇴화차수유리우개선대재정립적균균성,제고대재적만곡성능.