计算机仿真
計算機倣真
계산궤방진
COMPUTER SIMULATION
2014年
8期
125-129,239
,共6页
石油%粒子%颗粒动力学%数值仿真
石油%粒子%顆粒動力學%數值倣真
석유%입자%과립동역학%수치방진
Petroleum%Particle%Kinetics of granular%Numerical simulation
在石油输油工艺设计优化问题的研究中,输油工艺的选取和水合物颗粒浓度对漩涡区、低速区的影响问题,影响输油工业的安全,必须加以研究.实验中水合物的生成温度和压力波动难以控制.传统的Langrian计算方法对计算颗粒的数量受到限制,阻碍了颗粒浓度与两区关系的研究.针对上述问题,提出采用CFD软件FLUENT,应用以颗粒动力学为基础的Euler-Euler模型对石油工业T形管内,不同集输方式、不同颗粒浓度的油品-水合物流动仿真计算.得到了漩涡区、低速区随集输工艺和颗粒浓度的变化规律,以及两区的分布情况,并对仿真结果进行分析.结果表明,计算所得流场符合管道内浆液流动规律,较好地仿真了两区随颗粒浓度变化,可以为工艺的选取和管道位置的保护提供依据和指导.
在石油輸油工藝設計優化問題的研究中,輸油工藝的選取和水閤物顆粒濃度對漩渦區、低速區的影響問題,影響輸油工業的安全,必鬚加以研究.實驗中水閤物的生成溫度和壓力波動難以控製.傳統的Langrian計算方法對計算顆粒的數量受到限製,阻礙瞭顆粒濃度與兩區關繫的研究.針對上述問題,提齣採用CFD軟件FLUENT,應用以顆粒動力學為基礎的Euler-Euler模型對石油工業T形管內,不同集輸方式、不同顆粒濃度的油品-水閤物流動倣真計算.得到瞭漩渦區、低速區隨集輸工藝和顆粒濃度的變化規律,以及兩區的分佈情況,併對倣真結果進行分析.結果錶明,計算所得流場符閤管道內漿液流動規律,較好地倣真瞭兩區隨顆粒濃度變化,可以為工藝的選取和管道位置的保護提供依據和指導.
재석유수유공예설계우화문제적연구중,수유공예적선취화수합물과립농도대선와구、저속구적영향문제,영향수유공업적안전,필수가이연구.실험중수합물적생성온도화압력파동난이공제.전통적Langrian계산방법대계산과립적수량수도한제,조애료과립농도여량구관계적연구.침대상술문제,제출채용CFD연건FLUENT,응용이과립동역학위기출적Euler-Euler모형대석유공업T형관내,불동집수방식、불동과립농도적유품-수합물류동방진계산.득도료선와구、저속구수집수공예화과립농도적변화규률,이급량구적분포정황,병대방진결과진행분석.결과표명,계산소득류장부합관도내장액류동규률,교호지방진료량구수과립농도변화,가이위공예적선취화관도위치적보호제공의거화지도.